20/22 combo wheels rev classics

[Frijolito1988]

Hey guys I think im going to be getting some wheels this week. I am going for 20x 8.5 up front and 22.5 out back. I think both have 4.00 back spacing , should these be enough to sit flush , not rub ?

My truck is a 68 with 71-72 rear end and 5 lug conversion 71/71 spindles up front.

If they where to have other options what is the best backspacing ?

[ultrahd4me]

Here is the Rev Classic setup I ran on my stepside with a wide rear.The wheels are Rev Classic 106 20x8 & 22x9. Tires are 255/35 & 265/40.

[Frijolito1988]

Originally Posted by ultrahd4me

Here is the Rev Classic setup I ran on my stepside with a wide rear.The wheels are Rev Classic 106 20x8 & 22x9. Tires are 255/35 & 265/40.

What back spacing do you have ?

[ultrahd4me]

Originally Posted by Frijolito1988

What back spacing do you have ?

The front wheels are 20x8.5 with 5.25 offset, the rear 22x9 with 5.5 offset. That combo is perfect for a stepper but too narrow in the rear for a fleetside. I don't know which one you have, but it could be made to work on a fleetside with a rear spacer. I hope this helps. Thanks

[engineer_gregh]

The Boss 338's I was running had 4.25" back spacing and they were not flush. I just posted a thread with new Ridler 645's call "New Shoes". Those are 5.5" out back and 4.75" up front. The spacing is perfect for my 71. There are much more knowledgeable folks here that can help with BS questions but hopefully these pictures will help.

[SOON2BLAZE]

Ultrahd4me, your stepper has one of the sweetest looks of all the rides on the site IMHO. The paint, stance and wheel combo together = bad ass.