![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2015
Location: Baltimore MD
Posts: 6
|
Cutting Heckethorn/Rough Country Springs?
Hello to all who possess greater knowledge than I,
I am working on getting my 82 LB Fleetside into a reliable long hauler. (It has a 350 crate engine with good oil pressure and a whiney sm465 which I will eventually rebuild.) The truck had 33x12.5/15 tires, which I have replaced with 235/75r15 Goodyear Wranglers. PO installed a 3 inch leveling kit from Heckethorn/Rough Country (3 inch longer coil springs in front, 1 inch lift blocks in back). I would like to remove the rear lift blocks and cut 1.5 inches off the front springs which would keep me in the shock travel limits and lower the truck down closer to OEM height. (Plus, the price is right!) Does anybody know if I can cut these particular springs without screwing up the suspension? BTW I love all the two tone paint jobs I see over on the Pics thread here. Definitely the way I will go once I resolve the rust issues on the body. I have 15 years to get this thing in shape for my grandson (or 18 if my granddaughter takes it!) |
![]() |
![]() |
![]() |
#2 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Cutting Heckethorn/Rough Country Springs?
I didn't realize Heckethorn was affiliated with Rough Country. Anyway, I know guys cut coils to lower, so you should get away with that. But I would thing the spring rate and compression qualities are proper for the length they are now. Might want to consider just going with stock springs. You may even find someone wanting what you have for a trade deal
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2015
Location: Baltimore MD
Posts: 6
|
Re: Cutting Heckethorn/Rough Country Springs?
Thanks for the advice.
I am retired and my younger daughter is trying to bankrupt me with law school tuition bills. So I have more time than money at the moment. I'll probably cut the springs and see how they work before I invest in new springs and new shocks to match them. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|