Rust converter from home depot - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LMREESE · 04-06-2015, 08:30 PM

I am fixing to replace the rocker panels on my truck and need to do something about a little rust in the floorboard. Has anyone used the rust converter called corroseal from HD? Is it just as good as any of the others?

**truckster** · 04-06-2015, 09:28 PM

I haven't used that specific product, but most rust converters use some form of phosphoric acid and a sealer. They'll do the job if the rust isn't too heavy.

EARNHARDT#3 · 04-06-2015, 09:37 PM

Get POR15. Then you won't be second guessing the product.

04-06-2015, 08:30 PM	#1
LMREESE Registered User Join Date: Aug 2012 Location: Ringgold GA Posts: 149	Rust converter from home depot I am fixing to replace the rocker panels on my truck and need to do something about a little rust in the floorboard. Has anyone used the rust converter called corroseal from HD? Is it just as good as any of the others? __________________ 67 C10 swb bored out 350 granny 4 speed I come from a long line of moonshiners

04-06-2015, 09:28 PM	#2
truckster Senior Member Join Date: Jan 2001 Location: Orem, Utah Posts: 7,976	Re: Rust converter from home depot I haven't used that specific product, but most rust converters use some form of phosphoric acid and a sealer. They'll do the job if the rust isn't too heavy.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-06-2015, 09:37 PM	#3
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Rust converter from home depot Get POR15. Then you won't be second guessing the product. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.