|
|
|
04-07-2015, 08:42 AM
|
#1 |
|
Registered User
Join Date: May 2014
Location: Granbury texas
Posts: 96
|
250 cid p/s brackets
Does anyone know if the power steering brackets from a 1965 230 cid will work on a 70 250 cid??
|
|
|
|
04-07-2015, 09:51 AM
|
#2 |
|
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: 250 cid p/s brackets
IIRC the engines are the same casting and they should work. That said, if the pulleys and all of the accessories aren't with the set, you may have a really big chore in matching a set that will align. I know there are at least 2 different offsets for the PS pump pulley and maybe the bracket. along with 2-4 different pulley sets for the crank. Even the hose fittings may be different at least if it comes from a later donor. The Integrated head one is different than the non integrated head, but can be modified to work, there are some write ups/pics on the bb. That is the knowledge I have from doing a swap and watching another. Your best bet is to get a complete set up from one donor.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
