WTB Eaton No Spin Detroit Locker parts for HO52 HO72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RedRoad · 05-05-2015, 07:37 PM

Just finished inspecting my "rebuilt" No Spin and found it unusable as received. Cracked retainer with poor repair and welded spacer. An additional thick washer was added to the other side which looks like an attempt to even out the spring pressure or add pressure to worn springs.

Looking for one retainer and possibly two springs.

Does anyone have a source for parts or specifications of spring rates so I can get this thing back into service?

Thanks

Tony

05-05-2015, 07:37 PM	#1
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	WTB Eaton No Spin Detroit Locker parts for HO52 HO72 Just finished inspecting my "rebuilt" No Spin and found it unusable as received. Cracked retainer with poor repair and welded spacer. An additional thick washer was added to the other side which looks like an attempt to even out the spring pressure or add pressure to worn springs. Looking for one retainer and possibly two springs. Does anyone have a source for parts or specifications of spring rates so I can get this thing back into service? Thanks Tony Attached Images

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.