![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
|
How much space between fuel line pieces?
I got the fuel line made....there were many annoying moments but it's done.
However, how much of a gap do I leave between pieces of hard line (to be connected by hose)? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
|
Re: How much space between fuel line pieces?
ttt
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,188
|
Re: How much space between fuel line pieces?
I left maybe a half inch gap between my lines for the fuel filter, just enough so the metal wouldn't chaff together and shave off or cause a crack from vibrating against eachother. It doesn't matter too much. Just make sure you don't post a picture if you use over a couple inches of rubber line. There's a few people here who are convinced your truck can burn to the ground!
![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
|
Re: How much space between fuel line pieces?
Oh that's great, thanks.
Right now, I am at about 1/4 inch gaps between the in-cab line and the on-frame section. I have maybe 2 inches between the fuel line and the fuel pump. I should be able to get pics tomorrow. |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,188
|
Re: How much space between fuel line pieces?
For those lines I tend to run the rubber lines around 3-5 inches for flex. I don't see how it could flex more than a couple inches on a 2wd vehicle but I'd rather not take the chance.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jun 2013
Location: West Virginia
Posts: 6,421
|
Re: How much space between fuel line pieces?
Anyone else want to weigh in?
I was rather hoping to hear from Tx Firefighter as he was the main reason I decided to bend my own tubing. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|