|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-19-2015, 11:11 AM
|
#1 |
|
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
1973 Trac Lok Dana 60 + driveshaft from '63 k truck
I've got a 1973 Dana 60 with a Trac Lok that I pulled out of my '63. Nothing wrong with it except it does need a drivers side wheel cylinder. The reason I'm getting rid of it is that I swapped in a disc brake 14B. The spring measurements are 40.5 - standard GM. The Trac Lok works great. Parking brake cables are included, shock mounts for the '63 are still on it. I'm including the driveshaft as well. Its got the smaller joints (3310?) on it and is about 2 years old. I had it built when I swapped from the divorced T221 to the divorced 205. I needed a longer DS for the swap. 200$ takes it. Really don't want to ship it.
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205  52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
|
|
|
12-12-2015, 06:44 AM
|
#2 |
|
Registered User
Join Date: Oct 2015
Location: Keller, tx
Posts: 426
|
Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck
What gear ratio? Wish you would consider shipping. I'm i. 76262 zip and my rear is shot in my 63 1/2 ton long bed. ( I think this would work in my truck?)
|
|
|
|
|
12-12-2015, 11:01 AM
|
#3 | |
|
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck
Quote:
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
|
|
|
|
|
12-12-2015, 09:39 AM
|
#4 |
|
Registered User
 
Join Date: May 2010
Location: Clinton township, MI
Posts: 1,192
|
Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck
If you decide to separate the drive shaft and are willing to ship it I would be interested pending a measurement of it.
Thanks, Matt
__________________
It only has original paint once |
|
|
|
|
12-12-2015, 11:03 AM
|
#5 | |
|
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
Re: 1973 Trac Lok Dana 60 + driveshaft from '63 k truck
Quote:
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
