Tach and vacuum cluster

[scotts72heavyhalf]

All original cluster and comes with new circuit board. If you look at the fuel gage it looks like in the little red area at the bottom of the gauge it says "tandem rear" does that mean it came from bigger truck? C30 or up?

[scotts72heavyhalf]

Number 2

[scotts72heavyhalf]

Number 3

[scotts72heavyhalf]

Number 4

[scotts72heavyhalf]

Number 5

[68bowtie]

bump for ya. i wish this thread got more traffic...

[TBONE1964]

Looks to be a 70-72 cluster from a C40 or C50. The area on the fuel gauge is "tandem lock" It is for trucks with tandem axles such as a dump truck and indicates to the driver that the front and rear differentials are locked for maximum traction and power to the wheels.

The bezel is from a 68. The C40-C60 bezels did not have the deep cut out for the steering column.

Any idea if the tach works? It would bring $250.00 to $300.00 if the tach works. If not then it is worth about $150.00 for the tins, lens and vac gauge.

Hope this helps.
Tom

[scotts72heavyhalf]

Originally Posted by TBONE1964

Looks to be a 70-72 cluster from a C40 or C50. The area on the fuel gauge is "tandem lock" It is for trucks with tandem axles such as a dump truck and indicates to the driver that the front and rear differentials are locked for maximum traction and power to the wheels.

The bezel is from a 68. The C40-C60 bezels did not have the deep cut out for the steering column.

Any idea if the tach works? It would bring $250.00 to $300.00 if the tach works. If not then it is worth about $150.00 for the tins, lens and vac gauge.

Hope this helps.
Tom

I found this cluster on Craigslist and was good to purchase it to flip but it sold a day before I was to go pick it up