Water temp gauge replacement. (help finding previous post) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 10-07-2015, 07:57 AM

I'm working on rebuilding a cluster. I thought I had found a post before where someone took a gauge from the 73-75'ish trucks and made it work in our 67-72?

Was I smoking something because I cant seem to find that post now?

:edit: Or is it the volt meter that swaps out so it has real numbers rather than just a needle waving around?

mrlobster · 10-07-2015, 08:49 AM

I'm doing the same right now- replacing the ammeter with a late 70s battery gauge, and a temperature gauge as well. I'm wondering if the different gauge needs a specific sending unit.

**FirstOwner69** · 10-07-2015, 09:28 AM

Here's an old thread on the subject. Post 7 by VetteVet has good info on wiring.
http://67-72chevytrucks.com/vboard/s...d.php?t=483509

**LockDoc** · 10-07-2015, 10:46 AM

Quote:

Originally Posted by Dale99

I'm working on rebuilding a cluster. I thought I had found a post before where someone took a gauge from the 73-75'ish trucks and made it work in our 67-72?

Was I smoking something because I cant seem to find that post now?

:edit: Or is it the volt meter that swaps out so it has real numbers rather than just a needle waving around?

Here is a thread with info on it.

http://67-72chevytrucks.com/vboard/s...d.php?t=630289

LockDoc

Dale99 · 10-07-2015, 04:03 PM

Thanks. I had the temp and volt backwards. Its the volt meter that actually gives the direct numbers, not a WAG sweep.

10-07-2015, 07:57 AM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Water temp gauge replacement. (help finding previous post) I'm working on rebuilding a cluster. I thought I had found a post before where someone took a gauge from the 73-75'ish trucks and made it work in our 67-72? Was I smoking something because I cant seem to find that post now? :edit: Or is it the volt meter that swaps out so it has real numbers rather than just a needle waving around? __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

10-07-2015, 08:49 AM	#2
mrlobster Registered User Join Date: Oct 2014 Location: Quesnel, British Columbia Posts: 80	Re: Water temp gauge replacement. (help finding previous post) I'm doing the same right now- replacing the ammeter with a late 70s battery gauge, and a temperature gauge as well. I'm wondering if the different gauge needs a specific sending unit.

10-07-2015, 09:28 AM	#3
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Water temp gauge replacement. (help finding previous post) Here's an old thread on the subject. Post 7 by VetteVet has good info on wiring. http://67-72chevytrucks.com/vboard/s...d.php?t=483509

10-07-2015, 04:03 PM	#5
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: Water temp gauge replacement. (help finding previous post) Thanks. I had the temp and volt backwards. Its the volt meter that actually gives the direct numbers, not a WAG sweep.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.