![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Aug 2003
Posts: 54
|
bagged members.. i need help!
i will soon be in the procees of bagging my 67 C-10 and i am wondering about what to do w/ the front
of course dropped spindles but what brackets do i need??? or could i just drill the control arm and bolt the bag right up also will i have room for a 2600 in the front? |
![]() |
![]() |
![]() |
#2 |
Progress = 0%
Join Date: Nov 2001
Location: Kansas City, MO
Posts: 2,108
|
On these trucks you typically put a flat plate across the upper spring pocket (for the upper bag mount), then make a "cup" that sits in the lower spring pocket (for the lower bag mount). Yes the Firestone "2600" will work up front. Also, you'll need to remove the steering stop/rubber bumper from the lower a-arms. Look around on the Suspension board....... there is a lot of info there.
__________________
Jason - '67 GMC swb | '57 Bel-Air 4dr hardtop | '56 210 4dr Wagon | 2000 GMC Sierra |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|