F/S blazer doors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

landon4421 · 09-16-2003, 11:20 AM

I have a pair of complete original BLAZER doors. The only thing I know is that they are off a 4x4. posting pic of the sticker, if you can read let me know what they are off of. The doors look to be in great condition. I have not opened them up to look inside, but from the way the outside looks I dont think there is any bondo! I will open them tonight when I get home. I have pics, If anyone is interested. There is on minor little ding on the drivers side door on the inside also a place where it is cracked. I will post pics of both below. Also I am posting other pics.

price + shipping is,
drivers side is $150.00 firm
passside is $100.00 firm

“In the event that I should find problums tonight when I open them I will adjust the price.”

Any questions send me an e-mail click on at the bottom of the page. Thanks Landon

First pic is of the door sticker.

landon4421 · 09-16-2003, 11:22 AM

Pic 2 is of the damage on the drivers inside of the door !

landon4421 · 09-16-2003, 11:23 AM

Pic 3 is of the damage also on the drivers door, right buy the wing window.

landon4421 · 09-16-2003, 11:24 AM

Pic 4 is of the inside of driver door

landon4421 · 09-16-2003, 11:25 AM

Pic 5 is of the inside passange door.

landon4421 · 09-16-2003, 11:27 AM

Pic 6 is of the drivers out side

landon4421 · 09-16-2003, 11:28 AM

Pic 7 is of pass side outside!

landon4421 · 09-16-2003, 11:29 AM

Pic 8 of both doors.

**1970cstblazer** · 09-16-2003, 05:06 PM

Those are off from a 1970 V8 4 WD Blazer.

FRENCHBLUE72 · 09-16-2003, 07:43 PM

My guess would be 72 because of the screw in the wind wing, can not tell but is there a plate that bolt's to the door latch???

**1970cstblazer** · 09-16-2003, 08:13 PM

The VIN on the door sticker is KE180S1XXXXX.

That concludes it came off from a 1970 Blazer originally.

Other clues are the door panels, which are correct for low trim models from 1969-71, and the mirror brackets were used from 1969-1970. My 1970 Blazer has the same screw by the vent window, and the same chrome plate which mates to a wedge block mounted on the door opening to reduce door rattling.

sameyrasmea72 · 09-16-2003, 09:46 PM

What ever year they are they seem to be in great condition! I was wondering about that. Did all blazers 69-72 have that screw hole on the door. Seems like all the ones I have seen have had it. Is that the exact location that all 72 truck doors have?

landon4421 · 09-17-2003, 01:18 PM

Ok guys I opened the doors up and looked inside. The price should be raised but I will not do that. The inside looks great, the hardware for the windows could use to be replaced but other than that they are clean.

1970cstblazer, thanks for the input. I could not read the sticker to save my life. Bad eyes !

FRENCHBLUE72, I posted a pic of the door latch for you !

sameyrasmea72, they are in great shape, and I can not answer your other question.

Anyone intrerested in these original doors, they are in great shape and worth the money IMO. Let me know, Landon

FRENCHBLUE72 · 09-17-2003, 06:41 PM

I am interestred but need to sell the blazer top first.. Please do not put me in line or anything but if and when the top sell's if you still have the dooor's I would be really intrested..

landon4421 · 09-17-2003, 07:41 PM

FRENCHBLUE72, If you are totally serious I will hold on to them for you, it is not a problum, I have a barn to put them in ! I am not in a hurry for the cash, just ran across them and figured someone would need them ! Let me know, Landon !

landon4421 · 09-19-2003, 07:03 PM

being on how FRENCHBLUE72, has not gotten back to me the doors are still for sale ! Anyone else interested ?

Ring Master · 09-20-2003, 09:13 AM

How much to get the doors to Texas?

FRENCHBLUE72 · 09-20-2003, 10:44 AM

As my post abouve state's DO NOT PUT ME IN LINE for these door's the blazer top may never sell.. As if some one else come's by with the money please do not wait on me sell them to the first one with cash$$$$$$ Thank's Luke.

landon4421 · 09-21-2003, 01:47 AM

Ring Master, texas is a large state ! I would need a zip ! thanks

FRENCHBLUE72, as I stated I had no problum holding on to them for you till you cam up with the cash ! I was not putting you in line, I waited a few days you did not respone the went back up. no big deal !

Just trying to help you out if you really wanted them !

Ring Master · 09-21-2003, 10:44 AM

76511

landon4421 · 09-21-2003, 02:14 PM

ring master give me a few days to find the best way to ship the doors via ups, greyhound, or truck ! I will keep you informed of the progress K ( sent this to your pm box also.)

Ring Master · 09-21-2003, 02:56 PM

ok

landon4421 · 09-22-2003, 12:03 AM

cool I will get back to you asap ! Landon

landon4421 · 09-22-2003, 05:52 PM

ringmaster, here is the quote i got from greyhound ! greyhound click here
I am also going to call them to double check the price.

Let me know, I will need to box them up some how. Let me know what you want to do ! Landon.

If you would like to try and get a price from someone else, the doors waight is around 80 lbs, boxed they are 44"x48" These are rough figures. But they are close.

Just got off the phone and it is the same price. $65.95 per door, that is the best i could find around here !

Ring Master · 09-22-2003, 05:56 PM

when I click on it just give me a blank form to fill out

09-16-2003, 11:20 AM	#1
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	F/S blazer doors I have a pair of complete original BLAZER doors. The only thing I know is that they are off a 4x4. posting pic of the sticker, if you can read let me know what they are off of. The doors look to be in great condition. I have not opened them up to look inside, but from the way the outside looks I dont think there is any bondo! I will open them tonight when I get home. I have pics, If anyone is interested. There is on minor little ding on the drivers side door on the inside also a place where it is cracked. I will post pics of both below. Also I am posting other pics. price + shipping is, drivers side is $150.00 firm passside is $100.00 firm “In the event that I should find problums tonight when I open them I will adjust the price.” Any questions send me an e-mail click on at the bottom of the page. Thanks Landon First pic is of the door sticker. Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter" Last edited by landon4421; 09-16-2003 at 11:33 AM.

09-16-2003, 11:22 AM	#2
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 2 is of the damage on the drivers inside of the door ! Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:23 AM	#3
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 3 is of the damage also on the drivers door, right buy the wing window. Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:24 AM	#4
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 4 is of the inside of driver door Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:25 AM	#5
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 5 is of the inside passange door. Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:27 AM	#6
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 6 is of the drivers out side Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:28 AM	#7
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 7 is of pass side outside! Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 11:29 AM	#8
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Pic 8 of both doors. Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-16-2003, 05:06 PM	#9
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,858	Those are off from a 1970 V8 4 WD Blazer.

09-16-2003, 07:43 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	My guess would be 72 because of the screw in the wind wing, can not tell but is there a plate that bolt's to the door latch??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-16-2003, 08:13 PM	#11
1970cstblazer All stock and staying that way Join Date: Jul 2003 Location: Elkland, PA Posts: 1,858	The VIN on the door sticker is KE180S1XXXXX. That concludes it came off from a 1970 Blazer originally. Other clues are the door panels, which are correct for low trim models from 1969-71, and the mirror brackets were used from 1969-1970. My 1970 Blazer has the same screw by the vent window, and the same chrome plate which mates to a wedge block mounted on the door opening to reduce door rattling.

09-16-2003, 09:46 PM	#12
sameyrasmea72 Senior Member Join Date: Aug 2003 Location: Lubbock, Texas Posts: 2,443	What ever year they are they seem to be in great condition! I was wondering about that. Did all blazers 69-72 have that screw hole on the door. Seems like all the ones I have seen have had it. Is that the exact location that all 72 truck doors have?

09-17-2003, 01:18 PM	#13
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Ok guys I opened the doors up and looked inside. The price should be raised but I will not do that. The inside looks great, the hardware for the windows could use to be replaced but other than that they are clean. 1970cstblazer, thanks for the input. I could not read the sticker to save my life. Bad eyes ! FRENCHBLUE72, I posted a pic of the door latch for you ! sameyrasmea72, they are in great shape, and I can not answer your other question. Anyone intrerested in these original doors, they are in great shape and worth the money IMO. Let me know, Landon Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter" Last edited by landon4421; 09-17-2003 at 01:26 PM.

09-17-2003, 06:41 PM	#14
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I am interestred but need to sell the blazer top first.. Please do not put me in line or anything but if and when the top sell's if you still have the dooor's I would be really intrested.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-17-2003, 07:41 PM	#15
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	FRENCHBLUE72, If you are totally serious I will hold on to them for you, it is not a problum, I have a barn to put them in ! I am not in a hurry for the cash, just ran across them and figured someone would need them ! Let me know, Landon ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"



Register or Log In To remove these advertisements.

09-19-2003, 07:03 PM	#16
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	being on how FRENCHBLUE72, has not gotten back to me the doors are still for sale ! Anyone else interested ? __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-20-2003, 09:13 AM	#17
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	How much to get the doors to Texas? __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-20-2003, 10:44 AM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	As my post abouve state's DO NOT PUT ME IN LINE for these door's the blazer top may never sell.. As if some one else come's by with the money please do not wait on me sell them to the first one with cash$$$$$$ Thank's Luke. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-21-2003, 01:47 AM	#19
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Ring Master, texas is a large state ! I would need a zip ! thanks FRENCHBLUE72, as I stated I had no problum holding on to them for you till you cam up with the cash ! I was not putting you in line, I waited a few days you did not respone the went back up. no big deal ! Just trying to help you out if you really wanted them ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-21-2003, 10:44 AM	#20
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	76511 __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-21-2003, 02:14 PM	#21
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	ring master give me a few days to find the best way to ship the doors via ups, greyhound, or truck ! I will keep you informed of the progress K ( sent this to your pm box also.) __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-21-2003, 02:56 PM	#22
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	ok __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

09-22-2003, 12:03 AM	#23
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	cool I will get back to you asap ! Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-22-2003, 05:52 PM	#24
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	ringmaster, here is the quote i got from greyhound ! greyhound click here I am also going to call them to double check the price. Let me know, I will need to box them up some how. Let me know what you want to do ! Landon. If you would like to try and get a price from someone else, the doors waight is around 80 lbs, boxed they are 44"x48" These are rough figures. But they are close. Just got off the phone and it is the same price. $65.95 per door, that is the best i could find around here ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter" Last edited by landon4421; 09-22-2003 at 05:56 PM.

09-22-2003, 05:56 PM	#25
Ring Master The Anti-Rice Join Date: May 2000 Location: Bartlett,TX Posts: 224	when I click on it just give me a blank form to fill out __________________ I MUD IN RICE PATTIES! (Mud Frog) 1972 K5,454,SM465/NP205 ,18" Over Stock,41" GH Tires, D60/14BFF,on a custom twin framerail tube chassis. (RICE KILLA) 1972 Chevelle 325 LM7 w/TR224 cam/ 2002 T56 6 Speed,4 wheel power disc,12 bolt w/ eaton & 3.55 (DD) 99 Dodge CTD 4x4 Short Bed

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode