'70 grille decals

[dums]

Hi guys !
i'm looking for black vinyl decals to stamp on the grille of my 70 C10.
Found some on ebay or elsewere, but shipping cost is prohibitive to France (50 bucks for a 10 bucks part) !
Does anybody have an idea of the type of the police, so i can try to do it myself with a plotter.
If you have another idea (a website who can send it as a letter for example)
thanks a lot !

[Beaumont@]

Hey that's pretty cool I didn't know they exist. Wouldn't mind getting one for my 70 as well.

[Thebrownturd]

Mine turned out great. Classic truck parts or LMC is where I got mine. I'm sure most parts stores will carry them.

[Beaumont@]

Originally Posted by Thebrownturd

Mine turned out great. Classic truck parts or LMC is where I got mine. I'm sure most parts stores will carry them.

Hey brownturd that looks great. How did you get the letters lined up so nice?

[Acorn]

Howdy and welcome from Texas!
May be a long shot but, I would email the eBay seller and explain your situation and ask if shipping them to you as a letter is an option. You may be surprised by how many sellers will bend over backwards in order to build/keep a five star customer satisfaction rating. Just a thought.
For what it's worth, I bought the LMC decals for a '70 grill and I was not happy with how they looked. Best I remember, (it was a long time ago) the letter E and R didn't fit right.
Another option: how good are you with a wall brush and some modeling paint?
Best of luck to you and keep us posted.

[dums]

Originally Posted by Acorn

Another option: how good are you with a wall brush and some modeling paint?

Thank you for your answer and your help
i'm not very good with a wall brush, but i'll try to "copy" the leters with a kind of tracing paper (easy because the letters are embossed) and paste it on a black vinyl sheet, and cut it with a pair of scissors or a cutter blade.

if i know the exact font type ( i said "police" in my post, i'm sorry, it's the french word for "font", one of the funny things of french language ) it's gonna be easier !

[dums]

Originally Posted by Thebrownturd

Mine turned out great. Classic truck parts or LMC is where I got mine. I'm sure most parts stores will carry them.

Nice part !
i can see there is 2 black stripes above and below too, i'll have to find a thin black vinyl tape

[Lattimer]

Originally Posted by dums

Nice part !
i can see there is 2 black stripes above and below too, i'll have to find a thin black vinyl tape

The black stripes are pretty easy to paint. I taped mine out and painted them in with spray paint.

The letters I did the vinyl, got them from Classic Parts. They fit ok, until you get real close.

Painting them would be better, or if you are good at it or know somebody make your own vinyl.

[FirstOwner69]

It sounds like you have a GM grille with embossed letters rather than the reproduction grille which does not have the letters.

I painted my 69 grille as follows:
- Degrease the grille
- Apply masking tape over the entire center bar.
- Work the tape into all the recessed areas and into all the bends and corners forming the letters and horizontal grooves. I used my fingernails being careful not to tear the tape. A small piece of slightly pointed wood would also work in place of your fingernails
- Use an exacto/hobby knife to cut the letters around the bends forming the letters and grooves.
- Remove the tape from the areas you want painted.
- Spray the entire masked area with satin black paint.
- Remove the rest of the tape when the paint is dry.

It's easier than it sounds. This was the result.

[70cst]

Hey dums ...

to the forums and from Ohio

[dums]

Originally Posted by 70cst

Hey dums ...

to the forums and from Ohio

Thank you ! Best regards from France