|
|
|
09-25-2003, 10:03 PM
|
#1 |
|
Registered User
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
|
Carb tuning
Where is the best online resource for this....specifically for an 870 with vac secondaries...
__________________
FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection |
|
|
|
09-25-2003, 10:16 PM
|
#2 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
this probly won['t help your question at all. but i ran across this in summit the other day and i'm pretty sure i'm going to buy it. there won't be any guessing whether i'm rich or lean i'll know for sure from idle all the way up where i'm at.
http://store.summitracing.com/partde...art=EDL%2D6593 i think i'm gonna make a face for it to mount it in the ash tray, and when the tray is flipped up you won't be able to see it
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
|
|
09-25-2003, 10:18 PM
|
#3 |
|
Registered User
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
|
yeah, I planned on picking one of those up, but don't you need two?
__________________
FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection |
|
|
|
|
09-25-2003, 10:41 PM
|
#4 |
|
Formerly yellow72custom
Join Date: May 2001
Location: Austin, TX
Posts: 7,531
|
1 should work....most EFI vehicles are set up like that...
I would love to get one of those myself....but don't the O2 sensors only work well around 14.7:1 air/fuel ratio? I think the accuarcy on some gets really poor as they get farther and farther away from 14.7. 14.7 is great for cruising under light throttle....but more like 12:1 is better for power  Oh yeah....i saw a cheap air/fuel guage for $24 at Autozone the other day.......don't think it came with an 02 sensor though....but it is 1/5 the cost of the Edelbrock sensor.
__________________
'72 Chevy C10 Mild 350/TH350/3.07. Ochre/White. Old high school ride. '70 GMC C2500 '62 327 4bbl/SM465/4.56-geared Dana 60. White/White. Project or parts truck. '97 Saturn SL DD. 1.9/5-speed. 40+ highway mpg Last edited by lukecp; 09-25-2003 at 10:43 PM. |
|
|
|
|
09-25-2003, 10:53 PM
|
#5 |
|
Registered User
Join Date: Jan 2003
Location: Seattle WA
Posts: 1,466
|
Funny, I thought my 94 Caprice had two.....95's up have four from what I hear.
Wouldn't you want one on each header?
__________________
FocuzTech Performance Evergreen Protective Coatings Gatorhyde...the best kept secret in spray in bed lining & protection |
|
|
|
|
09-25-2003, 10:58 PM
|
#6 |
|
Registered User
Join Date: Jan 2002
Location: Houston, TX
Posts: 2,144
|
i think one is sufficeint. will one side of your motor be running leaner than the other?
__________________
'51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
