Steering shaft clamp & bolt thingy help!

[GMJimmy]

I've been trying to find the clamp and special bolt for my steering shaft on my 68 C10. Right at the bottom of the steering column the clamp that attaches the intermediate shaft to the splined end of the column. Does anybody have a part number or know where I can find one?

Thanks!
Jim

[Metaldoc]

They are called a rag joint and I'm looking as well. I've checked on prices but no one has them. I'm still looking for on option other than making it.
Derek

[GMJimmy]

Originally Posted by Metaldoc

They are called a rag joint and I'm looking as well. I've checked on prices but no one has them. I'm still looking for on option other than making it.
Derek

Nope
The rag joint is at the bottom that connects to the steering box. Rag joints are easy to find. I need the clamp and bolt that attaches the intermediate shaft to the steering column which is the opposite end of the rag joint.

http://www.classicparts.com/1960-69-.../#.VwgWBuArLnA

[raggedjim]

I'm pretty sure this is the clamp http://www.quadratec.com/products/918018_07.htm

The bolt is inline tube #INL14525

And I'm not sure about the nut...

Good luck, Rg

[GMJimmy]

Originally Posted by raggedjim

I'm pretty sure this is the clamp http://www.quadratec.com/products/918018_07.htm

The bolt http://www.autometaldirect.com/495-C...95&model_id=13

And I'm not sure about the nut...

Good luck, Rg

RG
Thanks! I didn't think to look at Jeep parts? It's really the bolt I need as it's a special diameter.
Thanks again!

[GMJimmy]

Originally Posted by GMJimmy

RG
Thanks! I didn't think to look at Jeep parts? It's really the bolt I need as it's a special diameter.
Thanks again!

On second look the clamp looks right but the bolt is a rag joint bolt. The bolt I need has a flat head and needs a nut on it.

[raggedjim]

Yeah, after I posted that I started thinking that it might not be right. I think this is the right one. Sorry for the mix up. Rg

http://www.ebay.com/itm/64-79-Steeri...-/181246959052