CO WTB: Power Steering Pulley 3993325DJ

[joeydurango]

Looking for a clean, straight, power steering pulley. Must be 3993325DJ (stamped on front). As far as I can tell, these came at least on some 4x4 trucks in '72 (maybe other years, maybe other applications).

Surface rust is okay; major pitting, any wobble, or belt surface irregularity isn't. These bend easy, so if you have a straight one on a pump that you want to sell, remove carefully!

[JMac11]

Got complete pump minus line fitting with bracket. Will look at conditio for you

[joeydurango]

Mostly interested in just the pulley... unless the price is right! Let me know, photos would be great. And I definitely need that pulley number.

[joeydurango]

Bump.

[cheyenne shortstep]

Here you go, looks to be in good, usable condition. $35 shipped.

[joeydurango]

That might work. Have you spun it on a pump, to see if it is straight? I've never been able to tell if they're true by just putting them on a flat surface.

[cheyenne shortstep]

Ok I just put this pulley on a pump and spun it with a 1/2" impact and it spins true.

[joeydurango]

That's good news!

Last question: hard to tell from the photo - is the rust in the belt groove area surface rust or pitted? Can I clean this pulley up with a wire wheel and expect smooth metal, or will I be left with a clean but pitted belt track?

If it's surface enough to leave a smooth belt groove, I'll take it. But I don't want to just swap my bent pulley for a straight one that will wear belts out quickly with a rough groove.

Thanks!

[cheyenne shortstep]

I would sand/beadblast it myself but to be honest it doesn't look too bad in the groove and should clean up fine with a wire wheel.

[joeydurango]

Sorry for the delay, crazy busy day at work today. Okay, I'll take it. PM me payment info? Thanks!