The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-27-2016, 08:29 PM   #1
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
'59 Fleet 235 carb ?

Hey Guys-

I have a '59 short fleet with an original 235ci engine and original carburetor.

2 Questions:

#1. Is the original carburetor a 1 barrel or 2 barrel?

#2. Where can I order a rebuild kit for the carburetor?

I've replaced the fuel filter.
The tank is fairly new and clean.
I installed a new cap, rotor, plugs and wires.

When cold, the truck fires right up, after driving it around the block and shutting it off, it just cranks and cranks and is super hard to start unless I squirt starting fluid in her. Also, if I don't leave the choke on a little bit when she is running (driving down the road even when very warm), it wants to stall out.

Thanks, any and all help is greatly appreciated. Pictures are also great as I don't know my way around this type of carburetor.
Tod
Tod59 is offline   Reply With Quote
Old 06-27-2016, 08:49 PM   #2
dwcsr
Hollister Road Co.
 
dwcsr's Avatar
 
Join Date: Apr 2005
Location: Houston
Posts: 6,131
Re: '59 Fleet 235 carb ?

It should be a Rochester B carb 1 barrel
http://www.carburetor-parts.com/Roch...-Kit_p_57.html
dwcsr is offline   Reply With Quote
Old 06-27-2016, 09:05 PM   #3
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: '59 Fleet 235 carb ?

Thank you for the link.
Tod59 is offline   Reply With Quote
Old 06-28-2016, 04:09 PM   #4
Wrenchbender Ret
Registered User
 
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,229
Re: '59 Fleet 235 carb ?

I agree it will be a roch. B. They are easy to o-haul. The kits are available any parts store but one from a specialty co. like DW showed will probably be better. Make sure the power piston goes in the hole & knocks the ball off the seat.
Wrenchbender Ret is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com