CO Harrison 4 Core Auto Radiator - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bhahn70 · 08-02-2016, 07:45 PM

Pulled from a 70 C/20 truck ran cool in 90 degree weather as of last drive 7/4/16.
150.00 shipped most places 100.00 picked up and PayPal fees. Thanx,Brian
Fins are very nice

**Eagle9502** · 08-02-2016, 10:37 PM

I'll take it. I may be able to meet you next Thursday when you make the trip, if I can't I'll just get you to ship it. I'm about 3 hours from Adel.

bhahn70 · 08-02-2016, 10:42 PM

Quote:

Originally Posted by Eagle9502

I'll take it. I may be able to meet you next Thursday when you make the trip, if I can't I'll just get you to ship it. I'm about 3 hours from Adel.

North?

**Eagle9502** · 08-02-2016, 10:58 PM

East and a little North. Statesboro, GA.

bhahn70 · 08-02-2016, 11:05 PM

Quote:

Originally Posted by Eagle9502

East and a little North. Statesboro, GA.

I could always meet you in Macon when I'm headed to Atlanta its a bit closer.

**Eagle9502** · 08-02-2016, 11:06 PM

Will you be coming down I75 from Atlanta to Adel?

bhahn70 · 08-02-2016, 11:07 PM

No but when I leave I will be headed up 75 through Atlanta

bhahn70 · 08-02-2016, 11:09 PM

I checked shipping from here or Adel for some reason it is pretty much the same price. Maybe because of the big box and weight.

**cst204x4** · 08-02-2016, 11:11 PM

In line

**Eagle9502** · 08-02-2016, 11:14 PM

Oh ok. I should be able to meet you somewhere along the way. If that doesn't work out, I am fine with paying the extra to ship it.

Would you happen to have any decent sheetmetal (fenders, inner fenders, core support, doors etc. or even a cab) for a '68?

bhahn70 · 08-02-2016, 11:26 PM

Quote:

Originally Posted by Eagle9502

Oh ok. I should be able to meet you somewhere along the way. If that doesn't work out, I am fine with paying the extra to ship it.

Would you happen to have any decent sheetmetal (fenders, inner fenders, core support, doors etc. or even a cab) for a '68?

Are you looking for pieces as in cuts. Firewall repair panel windshield pillars etc. Cut a roof off for a guy on here for the inner panel and never heard back so I have that .I have a good passenger fender cup isn't rotten just a bit pushed in. This is 70 stuff. 2 cabs I don't mind chopping up.

**Eagle9502** · 08-02-2016, 11:40 PM

Do you have a pic of the roof section so I can see if it's something I may need?

bhahn70 · 08-02-2016, 11:47 PM

Quote:

Originally Posted by Eagle9502

Do you have a pic of the roof section so I can see if it's something I may need?

Yup

**Eagle9502** · 08-02-2016, 11:58 PM

I'll pass since the drip rails are already gone. I've got a cab with a good floor but rust in the drip rail area. I'd be interested if it was the entire roof cut at the A and B pillars.

Let me know if you want me to go ahead and pay for the radiator or just give you cash in person.

bhahn70 · 08-03-2016, 12:06 AM

Quote:

Originally Posted by Eagle9502

I'll pass since the drip rails are already gone. I've got a cab with a good floor but rust in the drip rail area. I'd be interested if it was the entire roof cut at the A and B pillars.

Let me know if you want me to go ahead and pay for the radiator or just give you cash in person.

I have this one it's solid

**Eagle9502** · 08-03-2016, 02:30 PM

How much? I'd want the drip rails to be intact so I would think you'd need to cut at the bottom of the A & B pillar posts.

bhahn70 · 08-03-2016, 02:49 PM

Quote:

Originally Posted by Eagle9502

How much? I'd want the drip rails to be intact so I would think you'd need to cut at the bottom of the A & B pillar posts.

So this

**Eagle9502** · 08-03-2016, 10:06 PM

I believe that would work. What would be the price on this?

bhahn70 · 08-03-2016, 10:18 PM

180.00

**Eagle9502** · 08-09-2016, 09:41 PM

Brian,
I PM'd you my number. Give me a call or text when you get a chance. I wanted to see what your schedule was looking like and when the best time to possibly meet up would be.
Thanks

bhahn70 · 08-19-2016, 05:22 PM

Sold

**Eagle9502** · 08-22-2016, 09:09 PM

Arrived today. This was one of the best packaging jobs I have seen. I appreciate the extra effort that was taken to pack the radiator in such a way to prevent shipping damage. Thanks Brian

bhahn70 · 08-22-2016, 09:55 PM

Quote:

Originally Posted by Eagle9502

Arrived today. This was one of the best packaging jobs I have seen. I appreciate the extra effort that was taken to pack the radiator in such a way to prevent shipping damage. Thanks Brian

Your very welcome

**gmc 2500 4x4** · 09-07-2016, 05:25 AM

do you have the lower radiator retainers for that 4core?

bhahn70 · 09-07-2016, 09:54 AM

Quote:

Originally Posted by gmc 2500 4x4

do you have the lower radiator retainers for that 4core?

Sorry they sold with core support.

08-02-2016, 07:45 PM	#1
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,238	Harrison 4 Core Auto Radiator Pulled from a 70 C/20 truck ran cool in 90 degree weather as of last drive 7/4/16. 150.00 shipped most places 100.00 picked up and PayPal fees. Thanx,Brian Fins are very nice Attached Images __________________ Last edited by bhahn70; 08-16-2016 at 02:50 PM.

08-02-2016, 10:37 PM	#2
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator I'll take it. I may be able to meet you next Thursday when you make the trip, if I can't I'll just get you to ship it. I'm about 3 hours from Adel.

08-02-2016, 10:58 PM	#4
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator East and a little North. Statesboro, GA.

08-02-2016, 11:06 PM	#6
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator Will you be coming down I75 from Atlanta to Adel?

08-02-2016, 11:07 PM	#7
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,238	Re: Harrison 4 Core Auto Radiator No but when I leave I will be headed up 75 through Atlanta __________________

08-02-2016, 11:09 PM	#8
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,238	Re: Harrison 4 Core Auto Radiator I checked shipping from here or Adel for some reason it is pretty much the same price. Maybe because of the big box and weight. __________________

08-02-2016, 11:11 PM	#9
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,007	Re: Harrison 4 Core Auto Radiator In line __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles

08-02-2016, 11:14 PM	#10
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator Oh ok. I should be able to meet you somewhere along the way. If that doesn't work out, I am fine with paying the extra to ship it. Would you happen to have any decent sheetmetal (fenders, inner fenders, core support, doors etc. or even a cab) for a '68?

08-02-2016, 11:40 PM	#12
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator Do you have a pic of the roof section so I can see if it's something I may need?

08-02-2016, 11:58 PM	#14
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator I'll pass since the drip rails are already gone. I've got a cab with a good floor but rust in the drip rail area. I'd be interested if it was the entire roof cut at the A and B pillars. Let me know if you want me to go ahead and pay for the radiator or just give you cash in person.

08-03-2016, 02:30 PM	#16
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator How much? I'd want the drip rails to be intact so I would think you'd need to cut at the bottom of the A & B pillar posts.

08-03-2016, 10:06 PM	#18
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator I believe that would work. What would be the price on this?

08-03-2016, 10:18 PM	#19
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,238	Re: Harrison 4 Core Auto Radiator 180.00 __________________

08-09-2016, 09:41 PM	#20
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator Brian, I PM'd you my number. Give me a call or text when you get a chance. I wanted to see what your schedule was looking like and when the best time to possibly meet up would be. Thanks

08-19-2016, 05:22 PM	#21
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,238	Re: Harrison 4 Core Auto Radiator Sold __________________



Register or Log In To remove these advertisements.

08-22-2016, 09:09 PM	#22
Eagle9502 Senior Member Join Date: Dec 2015 Location: Brooklet, Georgia Posts: 844	Re: Harrison 4 Core Auto Radiator Arrived today. This was one of the best packaging jobs I have seen. I appreciate the extra effort that was taken to pack the radiator in such a way to prevent shipping damage. Thanks Brian

09-07-2016, 05:25 AM	#24
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,981	Re: Harrison 4 Core Auto Radiator do you have the lower radiator retainers for that 4core?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.