Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-22-2016, 02:05 PM | #1 |
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Help with 1972 k20 bumper bracket delema
Ive got a 1972 Chevy k20 longbed fleetside and im curious what bumper brackets are correct for what i need. i purchased these brackets (pictured) from a member here and was told they are correct for my truck. i never had a stock bumper on it so i had no idea what brackets i needed.
once i got them the holes on the frame didnt line up. the furthest rear hole would catch the bracket but thats it. after lookng at the truckandcarshop catalogue, it showed that the style of brackets i purchased were for a 2wd truck and that there was a set with further spaced bolt holes meant for a 4wd so i went ahead and purchased an aftermarket set of those brsckets. my frame holes line up just perfectly but the bumper fits like crap! its just a straight bracket with holes so i cant see how the aftermarket could screw them up THAT bad. it looks like if i used the first brackets i have it would alow the bumper to follow the contour of the body better but indont have a second hole for them. here is a link to the page with the brackets http://www.truckandcarshop.com/trucks60_72/t60_013.html so what style of bracket is correct? if the set i attached a picture of is correct why would my frame be drilled for the other style? its the original frame with number matching my cab that is all originally a 3/4t chevrolet 4x4. thanks
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
08-22-2016, 02:13 PM | #2 |
Registered User
Join Date: Dec 2015
Location: Pasadena, MD
Posts: 344
|
Re: Help with 1972 k20 bumper bracket delema
Here is my 72 K20 with what I can only imagine are NOT the original bumper brackets.
__________________
1972 K-20 Custom Camper 1971 K2500 Custom Camper (Sold) 2014 GMC 2500HD DMAX |
08-22-2016, 02:14 PM | #3 |
Registered User
Join Date: Dec 2015
Location: Pasadena, MD
Posts: 344
|
Re: Help with 1972 k20 bumper bracket delema
I bought a new diamond plate bumper that came with the following bumper brackets for install. I am anticipating having to do a little welding but hoping I don't.
__________________
1972 K-20 Custom Camper 1971 K2500 Custom Camper (Sold) 2014 GMC 2500HD DMAX |
08-22-2016, 02:21 PM | #4 |
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Re: Help with 1972 k20 bumper bracket delema
thanks for the reply, yours looks like it is a step style bumper. im trying to get one of the sport style chrome bumpers installed. i had a step bumper originally but it didnt fit with the way my restoration was heading. my exhaust guy told me to pie cut the brackets to make the bumper fit correctly, but i dont know why it should need to be done with a stock frame, stock bed, stock style bumper ect. i just seem to have the wrong brackets
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
08-22-2016, 02:27 PM | #5 |
Registered User
Join Date: Dec 2015
Location: Pasadena, MD
Posts: 344
|
Re: Help with 1972 k20 bumper bracket delema
Here is my bumper.
__________________
1972 K-20 Custom Camper 1971 K2500 Custom Camper (Sold) 2014 GMC 2500HD DMAX |
08-23-2016, 05:11 PM | #6 |
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Re: Help with 1972 k20 bumper bracket delema
thats quite different than the one im trying to install. ive got a factory chrome bumper. i found a pic on google of the style im trying to put on.
anybody else have any ideas to what brackets i need to be using?
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
08-23-2016, 07:54 PM | #7 |
Registered User
Join Date: Aug 2013
Location: Atlanta, GA
Posts: 702
|
Re: Help with 1972 k20 bumper bracket delema
I have a 1969 K20 that I put the sport bumper on like you are trying to do. I ordered the inner and outer brackets from LMC along with the splash guards. It was listed in the catalog as 4x4 short bed brackets and I have a long bed but they worked just fine and used the factory holes. Each side has two pieces and they bolt together.
__________________
1968 C10 292/3 spd - sold 1969 K10 350/3 spd/205 - sold 1971 K5 350/4 spd/ 205 - sold 1970 K20 350/350/205 - sold 1969 K20 396/400/205 - work in process |
08-23-2016, 10:01 PM | #8 |
Born Psycho
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,936
|
Re: Help with 1972 k20 bumper bracket delema
real 4x4 rear inner brackets are longer than the ones pictured and have a thick piece of metal welded inside for support. do a search on here, a member was recently selling a set of "real" 4x4 inners. the outers are the same.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
08-23-2016, 10:15 PM | #9 |
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Re: Help with 1972 k20 bumper bracket delema
well, thats what ive got, although aftermarket. so i have the correct mounts on it, they just fit like crap. the bumper should follow the contour of the body more from the side correct?
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
08-23-2016, 10:28 PM | #10 |
Senior Member
Join Date: Sep 2008
Location: Harrison, Arkansas
Posts: 9,860
|
Re: Help with 1972 k20 bumper bracket delema
Did you try switching the brackets side to side, IE, flip them over?
Larry
__________________
other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless. |
08-23-2016, 11:11 PM | #11 |
Registered User
Join Date: Jul 2012
Location: St. John, Washington
Posts: 618
|
Re: Help with 1972 k20 bumper bracket delema
hmmm, i dont know if i tried that or not. ill have to see if its possible.
__________________
"Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|