removing key cylinder.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lotik · 10-07-2003, 08:47 PM

i have a tilt van column in my truck, and it has the key cylinder on the column. is there a way to remove it? i already have a cylinder mounted in the dash i am using.

Blue Beard · 10-07-2003, 09:09 PM

If you are just trying to remove the cylinder from the column.........there is a retaining keeper inside the column.

I would say that the outer collar might have to be reworked to get it smooth.

**68 Stepside** · 10-07-2003, 10:44 PM

I bet someone on the 73-87 board will know, that series of truck has the ignition cylinder in the column.

Chevy Wrench · 10-08-2003, 02:40 AM

You have to pull the wheel and retaining plate. There is a small "c" clip that holds it in. Then remove the turn signal switch. After that, there is a small set screw that holds the cylinder in place. Remove that, and pull out the cylinder. On some models it is not necessary to remove the t/s switch. Good luck. If ya need pics, let me know.
John

lotik · 10-08-2003, 05:20 PM

thanks fellas

10-07-2003, 08:47 PM	#1
lotik drag it like you stole it Join Date: Feb 2002 Location: Louisiana Posts: 542	removing key cylinder.. i have a tilt van column in my truck, and it has the key cylinder on the column. is there a way to remove it? i already have a cylinder mounted in the dash i am using. __________________ negative camber //LA\\

10-07-2003, 09:09 PM	#2
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	If you are just trying to remove the cylinder from the column.........there is a retaining keeper inside the column. I would say that the outer collar might have to be reworked to get it smooth. __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-07-2003, 10:44 PM	#3
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	I bet someone on the 73-87 board will know, that series of truck has the ignition cylinder in the column. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-08-2003, 02:40 AM	#4
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	You have to pull the wheel and retaining plate. There is a small "c" clip that holds it in. Then remove the turn signal switch. After that, there is a small set screw that holds the cylinder in place. Remove that, and pull out the cylinder. On some models it is not necessary to remove the t/s switch. Good luck. If ya need pics, let me know. John __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

10-08-2003, 05:20 PM	#5
lotik drag it like you stole it Join Date: Feb 2002 Location: Louisiana Posts: 542	thanks fellas __________________ negative camber //LA\\

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.