![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2015
Location: St. Charles, Michigan
Posts: 214
|
where to run a manual choke cabel?
I have removed the quadrejet carb of my dads truck when I started to bring it back for setting for 28 years for a sitting half finished resto job. I got a good deal on a Edelbrock carb with manual choke almost new, looks new nearly free. It works good now that it is cold I need to hook up a manual choke.
I bought the original style choke kit parts from LMC so I can install it in the dash where it says choke and has a plug in the dash. Is there a spot from the factory where the choke cable went through the firewall? Or am I going to have to drill a hole? I was hoping to locate a pre-drilled hole it seems like everything else that wasn't installed as an option was ready for it just needed to bolt it in. if anyone has pictures of a original choke cable set up please let me know! Thanks |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2015
Location: St. Charles, Michigan
Posts: 214
|
Re: where to run a manual choke cabel?
I found this
http://67-72chevytrucks.com/vboard/s...ighlight=choke so it looks like it runs through the grommet above the wire harness connection on the firewall. It is just a plastic plug do they make a grommet or just poke a hole? This sure doesn't seem like a very direct route for the cable? do I need other brackets? I will look at LMC see if I can find any thing. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2015
Location: St. Charles, Michigan
Posts: 214
|
Re: where to run a manual choke cabel?
by the way 68 C20 327
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2011
Location: Osceola, Ia
Posts: 2,017
|
Re: where to run a manual choke cabel?
If i remember,
![]()
__________________
Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold ![]() 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039 |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2015
Location: St. Charles, Michigan
Posts: 214
|
Re: where to run a manual choke cabel?
thanks
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2015
Location: St. Charles, Michigan
Posts: 214
|
Re: where to run a manual choke cabel?
thanks for the help got it hooked up and works great!
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|