Brake light problems

[hunter1123]

So i have both blinkers working both tail lights work when lights are on but i only have the passenger side brake light working and the driver side will not work, just re did the wiring ao all the connections should be fine and ive tried installing multiple grounds with no luck any ideas??

[ck5566]

Originally Posted by hunter1123

So i have both blinkers working both tail lights work when lights are on but i only have the passenger side brake light working and the driver side will not work, just re did the wiring ao all the connections should be fine and ive tried installing multiple grounds with no luck any ideas??

I know you have said you have installed grounds BUT ground wires for these trucks are very important being our trucks have a lot of under body rust to them. Try going over the grounds one more time as sometimes we miss things. Good Luck. Others might have more to add hopefully you will get your answer!

[hunter1123]

Okay thank you, how many body to frame grounds do you think there should be on the truck?

[ck5566]

Originally Posted by hunter1123

Okay thank you, how many body to frame grounds do you think there should be on the truck?

If I recall 5 of them for V8. Here's the locations

1 & 2 Fire wall to Valve Covers (6 cyl only One used)
3rd. Front Pass side inner fender (frame to inner lower fender well)
4th. Under pass door about 1/2 way too middle of door
5th. Pass side at rear tire location area

Most are mounted from body panels to frame

[hunter1123]

Okay thanks bud ill check em out

[ck5566]

Originally Posted by hunter1123

Okay thanks bud ill check em out

Let us know what you found or what the fix was!

[ck5566]

Originally Posted by hunter1123

Okay thanks bud ill check em out

Each Light needs to be grounded so look carefully at each lights connections. Being a Electrician I know I can hold any one bare power wire all day long and NOT get shocked, But when you put the ground wire in or hooked up at that point you will get Shocked believe me I know. The ground wire makes a complete circuit.