MT 1972 Blazer cst parts truck

[Coatingguy]

Hello everyone, I have whats left of a 1972 Blazer cst. This truck has been sitting since about 1991. it is being sold as a parts only truck. It has no title or vin plate, both are long gone.
Ill start with the body. The firewall, windshield frame areas are all good and basically solid. The front drivers floor has a little rust but not bad. The kick panels are solid, the passenger side floor is not rusted through. The rear cargo floor is mint other than a little rust bubbling at the very rear where the carpet strip covered. The drivers side quarter is savable, it does have rust and is dented toward the gas cap area but I've saved a lot worse. The drivers door and fender are junk, as is the hood. The passenger fender isn't too bad at all, definitely usable with a little work. The passenger door has a small dent above the door panel area, and below the outer lower body line is dented and rusted but there again, usable. The majority of the passenger quarter is junk, though behind the wheel opening and around the taillight area, its all straight and clean. The original AC dash is intact and the radio hole has not been cut out.
The frame looks nice, the only issue I see is where the rear bumper mounts to the frame horns, needs to be worked around a little, nothing major.
The steering is all intact, other than the column. The brakes are all intact and the fronts work. The rear end is a 12 bolt but has no center section, axle shafts, or brakes. Also the top is off of a 1973, its in good shape. If someone wants it they can have it. Tailgate isn't worth fixing.
If i can answer any question ill do so to the best of my knowledge. I want to sell this as a whole, maybe someone out there can use the rest of this thing for something. Thanks. $600
Im new to this website and am not the greatest with computers either. Ill do my best. I have lots more pictures also.

[Coatingguy]

A few more pictures

[Coatingguy]

more pictures

[Coatingguy]

pictures

[rayray767]

I'll take it as a whole ... Let me get some shipping quotes together .. Pm me your phone so we can talk... I'll need your zip code for starters

[Coatingguy]

Ray ray,
I will do that.
thanks

[raggedjim]

Good call Rayray, the windshield frame looks to be solid and I think it will make a great starting point.

Good luck, Rg

[too much stuff]

Is the bolt in hump for sale?

[4x41971SWB]

If by any chance the deal falls through I will take it and pick it up in person.
Than7

[Rex10]

What month was the Blazer built?

[Coatingguy]

4x41971swb,
I will keep you informed. Thanks for your interest.

Rex10,
Im not honestly sure. How does one figure that out?
Thanks

[Coatingguy]

Too much stuff,
Well the hump pictured is kind of included with truck since its pictured. Im sure I have others lying around. Do you need a tall or short?

[too much stuff]

Originally Posted by Coatingguy

Too much stuff,
Well the hump pictured is kind of included with truck since its pictured. Im sure I have others lying around. Do you need a tall or short?

Could use a tall one with the trans case hole as pictured. Thanks.

[Rex10]

The blue lable on the inside of the drivers side door jam.

[Coatingguy]

Rex10,
if you are refering to the VIN tag on the drives inside door jam, it is no longer there.
thanks

[Coatingguy]

A few more pictures of interest.

[Coatingguy]

pictures

[k5blazin]

Put me in line please. I will take it if the others pass. Thanks

[k5blazin]

Anyone heard from George or know how to contact him? I purchased this several months ago and have lost contact. Super nice guy hope all is well. Thanks

[too much stuff]

Originally Posted by k5blazin

Anyone heard from George or know how to contact him? I purchased this several months ago and have lost contact. Super nice guy hope all is well. Thanks

Good luck dealing with this guy. Hope you didn't give him any money.

[k5blazin]

Originally Posted by too much stuff

Good luck dealing with this guy. Hope you didn't give him any money.

Ya I did! Think he may have got me! 600$

[briank]

Wow....you're very patient!

[1rippen6]

http://67-72chevytrucks.com/vboard/s...d.php?t=737205

[k5blazin]

Ok it was confirmed today this guys bad news. He has my money and it's was sold to another member the same week. Won't respond to any contact. Sad to say there are people like this on this forum. Just wanting to let other members know to stay clear. Maybe the moderators can block him? Hind sight I should have responded to this thread stating that I made payment so other parties could have seen the scam. Thanks

[4x41971SWB]

Look at post #9 of this thread. I said I would take it if the person before me did not.
I was the sent a PM from George Moss with his number the next day on the 24th which was thanksgiving day an the day I made the deal with George and purchased it. I sent him money the following Monday. He told me he was going to be out of town for the next couple of months. If I could pick it up then. Well to make a long story short and belive me there is a lot to tell. I played hell trying to get a hold of him for several months but I was relentless in my pursuit to get a hold of him. I reached out to several other board members who helped me and have met three members who have been screwed by George for several hundrrd dollars.
If it wasn't for the help of another member who is from the same town I would have been screwed by George as well which was his full intent.
Through my searching this George Moss has been on this forum under at least one other name if not more. So if the board does not do anything about it just beware of new members from that area especially selling K5 parts.
Again I have alot more to say but this is getting long enough and everything can be confirmed by several other board members who have been on here for several years.