Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-04-2017, 01:26 PM | #1 |
Registered User
Join Date: May 2016
Location: Truro, NS
Posts: 6
|
Home built mounting bracket for york 210
Hey guys, just wondering if any of you have built your own mounting bracket for a York ac compressor. I am putting it on a 250 l6 in a 72 c10, using it for onboard air. Any info or help would be greatly appreciated. Thanks.
|
01-05-2017, 12:06 AM | #2 |
Registered User
Join Date: Jun 2016
Location: Vancouver B.C.
Posts: 206
|
Re: Home built mounting bracket for york 210
If that's the same model York that was used by Ford for ages, then maybe a 300 six in a truck or van might have something adaptable. You'll likely have good luck finding one in a late 70s to early 80's van. Lots of 79-83? Mustangs came with a 200/3.3L straight six, so they might have something too.
Hope this helps. |
01-05-2017, 12:27 AM | #3 |
Registered User
Join Date: May 2016
Location: Truro, NS
Posts: 6
|
Re: Home built mounting bracket for york 210
Thanks that's a good idea, might be able to modify something a bit. Cheers
|
01-05-2017, 11:01 AM | #4 |
Registered User
Join Date: Jun 2008
Location: Moss Point,Ms.
Posts: 1,439
|
Re: Home built mounting bracket for york 210
Do you have a picture of it?
It's possible that I may have one in the "Pile" I know I have some for small block Chevies. Been doing a/c work for many years now and stuff is hard to keep up with as to what fits what. Usually it's just a flat plate mounted on legs(flat plate) that bolt to the side of the engine.possibly an idler pulley also. Is this for a/c or just an air pump? Mike. |
01-05-2017, 11:10 AM | #5 |
Registered User
Join Date: Nov 2014
Location: Bigfork, Montana
Posts: 1,137
|
Re: Home built mounting bracket for york 210
aftermarket guys make brackets for small blocks & LS motors, didn't see any for straight sixes. It's been a long time, BUT I had a 72 nova with a 250, dealer installed air & I'd swear it had a york on it. Not sure, been a long time. A/C blew cold as ice, went parking with my girl, nosed in to some bushes, no airflow...blew the high side line, scared the crap out of me & my girlfriend - date was over!
|
01-05-2017, 02:30 PM | #6 |
Registered User
Join Date: May 2016
Location: Truro, NS
Posts: 6
|
Re: Home built mounting bracket for york 210
I have a picture of the pump but not the bracket. I'll be used for online air, just a pump, no ac. Using it for bags.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|