Rochester carburetor rebuild service recommendations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**71CHEVYSHORTBED402** · 01-06-2017, 11:10 PM

1971 C-10 402

It runs like a top, but it hasn't been rebuilt in a long while. Considering the rest of the truck will be mostly restored, I figure a fresh carb. is in order. It no longer has a choke. I believe it had a divorced choke, and I may be missing some linkage as well. Hopefully the service can set me up with everything needed for the choke as well.

On a side note, as a learning experience - I needed a carb. for my beater because the Rochester in that didn't have a choke either. Not having replaced a carb. before, and because I "chose" to learn how on my "good truck", I paid to have an Edlebrock installed. It runs like a top and probably gets better gas mileage, but I did lose some guts. Apparently as "standard" replacement carbs. go, Edlebrook is practical, while Holley offers power. Had I known that, I may have run with a Holley. It's a driver, but I do miss the power.

Thanks for any input/recommendations

**71CHEVYSHORTBED402** · 01-06-2017, 11:17 PM

On another side note, as a learning experience: Also found out they make an electric choke for these carbs. Don't know what's involved, like whether or not my carb. has the required parts, but in hindsight again.........

52napco · 01-06-2017, 11:33 PM

Bob stone aka the carb doctor is the man!!!! Best money you will ever spend.

**71CHEVYSHORTBED402** · 01-07-2017, 12:52 AM

Quote:

Originally Posted by 52napco

Bob stone aka the carb doctor is the man!!!! Best money you will ever spend.

Thanks. By chance is he in Pennsylvania? Other than that, I see Carburetor Doctor in Canada.

**leddzepp** · 01-07-2017, 04:42 PM

Quote:

Originally Posted by 52napco

bob stone aka the carb doctor is the man!!!! Best money you will ever spend.

x2

**davischevy** · 01-08-2017, 12:09 AM

I'm sure any of the people mentioned are great, but I use this guy.

http://customrebuiltcarbs.com/contact.php3

**DeadheadNM** · 01-06-2017, 11:48 PM

Sean Murphy Induction does a good job. I just got my restored q-jet back for the blazer build from SMI.

**71CHEVYSHORTBED402** · 01-07-2017, 01:07 AM

Quote:

Originally Posted by DeadheadNM

Sean Murphy Induction does a good job. I just got my restored q-jet back for the blazer build from SMI.

Noted, thank you

52napco · 01-07-2017, 09:05 AM

Yes he is in pa

yuccales · 01-07-2017, 12:33 PM

Tony,
If you enjoy going "hands on" and like Q-Jets, get Cliff Ruggles book "How To Rebuild And Modify Rochester Quadrajet Carburetors". Darn good book with lots of great info! Pictures alone are worth the price of admission.

ranger danger · 01-08-2017, 10:42 AM

Quote:

Originally Posted by DeadheadNM

Sean Murphy Induction does a good job. I just got my restored q-jet back for the blazer build from SMI.

Sean is where I got mine from. Ran like a Swiss watch right out of the box!

http://www.smicarburetor.com/

**70cst** · 01-07-2017, 12:52 PM

More possibilities

http://cliffshighperformance.com/index.html

http://www.carburetorusa.com/

I believe this is the service that I used ...
http://www.thecarbshop.com/

dfwright · 01-07-2017, 01:04 PM

I had mine rebuilt by Mark at Quadrajet Power, at the recommendation of another member here. He did a great job, at a reasonable price. The fact that he was local to me was a bonus!

One Stop Quadrajet Shop

**dmjlambert** · 01-08-2017, 11:14 AM

If you are going for a stock setup and want inexpensive, and ready to bolt on and go, I recommend National Carburetors. http://nationalcarburetors.com/
I like my Quadrajet from them.

Wrenchbender Ret · 01-08-2017, 11:51 AM

The Edelbrock carb should have practically the same "guts" as the Q-jet or Holley. Possibly the secondary throttles are not opening due to the linkage adjustments. You can get a kit to put electric choke on the ED carb. If it is running good & mileage is respectful I would leave it on there.

**71CHEVYSHORTBED402** · 01-08-2017, 12:23 PM

Quote:

Originally Posted by Wrenchbender Ret

The Edelbrock carb should have practically the same "guts" as the Q-jet or Holley. Possibly the secondary throttles are not opening due to the linkage adjustments. You can get a kit to put electric choke on the ED carb. If it is running good & mileage is respectful I would leave it on there.

That was my first thought (2nds), but I believe they're opening. I'll do a visual when the weather allows it. The Edelbrock does have a choke.

coreyjhen · 01-08-2017, 12:44 PM

I've had good results from Jet in California. They offer several levels of custom tuning: http://jetchip.com/product-category/...ter-quadrajet/

01-06-2017, 11:10 PM	#1
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,322	Rochester carburetor rebuild service recommendations 1971 C-10 402 It runs like a top, but it hasn't been rebuilt in a long while. Considering the rest of the truck will be mostly restored, I figure a fresh carb. is in order. It no longer has a choke. I believe it had a divorced choke, and I may be missing some linkage as well. Hopefully the service can set me up with everything needed for the choke as well. On a side note, as a learning experience - I needed a carb. for my beater because the Rochester in that didn't have a choke either. Not having replaced a carb. before, and because I "chose" to learn how on my "good truck", I paid to have an Edlebrock installed. It runs like a top and probably gets better gas mileage, but I did lose some guts. Apparently as "standard" replacement carbs. go, Edlebrook is practical, while Holley offers power. Had I known that, I may have run with a Holley. It's a driver, but I do miss the power. Thanks for any input/recommendations __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

01-06-2017, 11:17 PM	#2
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,322	Re: Rochester carburetor rebuild service recommendations On another side note, as a learning experience: Also found out they make an electric choke for these carbs. Don't know what's involved, like whether or not my carb. has the required parts, but in hindsight again......... __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

01-06-2017, 11:33 PM	#3
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Rochester carburetor rebuild service recommendations Bob stone aka the carb doctor is the man!!!! Best money you will ever spend.

01-08-2017, 12:09 AM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: Rochester carburetor rebuild service recommendations I'm sure any of the people mentioned are great, but I use this guy. http://customrebuiltcarbs.com/contact.php3 __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

01-06-2017, 11:48 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: Rochester carburetor rebuild service recommendations Sean Murphy Induction does a good job. I just got my restored q-jet back for the blazer build from SMI. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-07-2017, 09:05 AM	#9
52napco Registered User Join Date: Jun 2014 Location: upstate sc Posts: 2,095	Re: Rochester carburetor rebuild service recommendations Yes he is in pa

01-07-2017, 12:33 PM	#10
yuccales Registered User Join Date: May 2011 Location: Northern Calif. Posts: 3,771	Re: Rochester carburetor rebuild service recommendations Tony, If you enjoy going "hands on" and like Q-Jets, get Cliff Ruggles book "How To Rebuild And Modify Rochester Quadrajet Carburetors". Darn good book with lots of great info! Pictures alone are worth the price of admission.

01-07-2017, 12:52 PM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Rochester carburetor rebuild service recommendations More possibilities http://cliffshighperformance.com/index.html http://www.carburetorusa.com/ I believe this is the service that I used ... http://www.thecarbshop.com/ __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! Last edited by 70cst; 01-07-2017 at 01:04 PM.

01-07-2017, 01:04 PM	#13
dfwright Registered User Join Date: Jan 2009 Location: San Antonio, Texas Posts: 1,374	Re: Rochester carburetor rebuild service recommendations I had mine rebuilt by Mark at Quadrajet Power, at the recommendation of another member here. He did a great job, at a reasonable price. The fact that he was local to me was a bonus! One Stop Quadrajet Shop __________________ 1972 C10 LWB, 350/350 Deconstruction began 5/2009, mostly completed restoration, 5/2017

01-08-2017, 11:14 AM	#14
dmjlambert Senior Member Join Date: Apr 2016 Location: Cypress, TX Posts: 3,859	Re: Rochester carburetor rebuild service recommendations If you are going for a stock setup and want inexpensive, and ready to bolt on and go, I recommend National Carburetors. http://nationalcarburetors.com/ I like my Quadrajet from them.

01-08-2017, 11:51 AM	#15
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: Rochester carburetor rebuild service recommendations The Edelbrock carb should have practically the same "guts" as the Q-jet or Holley. Possibly the secondary throttles are not opening due to the linkage adjustments. You can get a kit to put electric choke on the ED carb. If it is running good & mileage is respectful I would leave it on there.

01-08-2017, 12:44 PM	#17
coreyjhen Registered User Join Date: Nov 2016 Location: Albuquerque, NM Posts: 110	Re: Rochester carburetor rebuild service recommendations I've had good results from Jet in California. They offer several levels of custom tuning: http://jetchip.com/product-category/...ter-quadrajet/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.