Help wiring new ignition switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Yaboyolin · 01-26-2017, 07:39 PM

I'm trying to wire up an aftermarket ignition switch for my truck, the original didn't have a key and all the lock smiths wanted to charge me $60 to get one made, so I pulled an autzone one out of a box that I had used years ago. Anyways, the switch has 4 pins; Starter, Batt, Ign, Acc. I've got what follows down.

Ign: Pink

Starter: Purple

Batt: Red

That's it, where do the 2 small browns or tans, large brown, brown/white, 2 greens, and other purple go?

01-26-2017, 07:39 PM	#1
Yaboyolin Registered User Join Date: Dec 2016 Location: Murchison, Texas Posts: 13	Help wiring new ignition switch I'm trying to wire up an aftermarket ignition switch for my truck, the original didn't have a key and all the lock smiths wanted to charge me $60 to get one made, so I pulled an autzone one out of a box that I had used years ago. Anyways, the switch has 4 pins; Starter, Batt, Ign, Acc. I've got what follows down. Ign: Pink Starter: Purple Batt: Red That's it, where do the 2 small browns or tans, large brown, brown/white, 2 greens, and other purple go? __________________ If someone from the future doesn't come back in time to stop you, it can't be that bad of an idea

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.