454 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luv68's · 10-16-2003, 09:28 PM

will have pictures this weekend. Disassembled 454 4bolt main, was told it was standard when I bought it. No oversize on bearings or pistons. Will need to be rebuilt. no intake or oil pan. Cannot ship must be picked up. Has been sitting for a while. $400

jacquesdean · 10-17-2003, 10:56 AM

do you have all the pulleys, brackets, heads. with it

Luv68's · 10-17-2003, 05:33 PM

yes I do have the heads, but no brackets

jacquesdean · 10-17-2003, 05:40 PM

do you have the block vin number and casting numbers for the heads please

jacquesdean · 10-17-2003, 05:42 PM

i see you are looking for a 68 cab, would a 69 do?

Luv68's · 10-17-2003, 08:02 PM

block casting # 14015445 heads 14092360

Luv68's · 10-17-2003, 08:04 PM

#2

jamis · 10-17-2003, 08:22 PM

How about the rods 3/8 or 7/16

block is #14015445...454.......78-90... 4 bolt

heads are #14092360...86-88...oval...OPEN...454 Truck

Luv68's · 10-17-2003, 08:25 PM

will need to double check but I think they are 3/8

Luv68's · 10-19-2003, 07:55 AM

TTT

10-17-2003, 05:40 PM	#4
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	454 do you have the block vin number and casting numbers for the heads please __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 05:42 PM	#5
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	454 i see you are looking for a 68 cab, would a 69 do? __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 08:02 PM	#6
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	block casting # 14015445 heads 14092360 Attached Images

10-17-2003, 08:04 PM	#7
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	#2 Attached Images

10-17-2003, 08:22 PM	#8
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	How about the rods 3/8 or 7/16 block is #14015445...454.......78-90... 4 bolt heads are #14092360...86-88...oval...OPEN...454 Truck Last edited by jamis; 10-17-2003 at 08:25 PM.

10-16-2003, 09:28 PM	#1
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	454 will have pictures this weekend. Disassembled 454 4bolt main, was told it was standard when I bought it. No oversize on bearings or pistons. Will need to be rebuilt. no intake or oil pan. Cannot ship must be picked up. Has been sitting for a while. $400

10-17-2003, 10:56 AM	#2
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	re: 454 do you have all the pulleys, brackets, heads. with it __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 05:33 PM	#3
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	yes I do have the heads, but no brackets

10-17-2003, 08:25 PM	#9
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	will need to double check but I think they are 3/8 Attached Images

10-19-2003, 07:55 AM	#10
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	TTT

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.