Whoohoo today's project is a mile stone!

[Robznob11]

Well I finally converted over to powersteering....no more work out to park or maneuver in a shop.....I cant thank the board members enough for the info on parts for the swap! Here is the rundown!
Gearbox complete with pump and hoses (clean one) from a 84 burb= $75
PS pump complete with bracket and pully from 2004 5.3=$35 bucks
New pressure hose rock auto=$17
New moog pitman arm rockauto=$48
New belt napa=$36
1' low psi PS hose=$4
1 qt ps fluid=$5
Couple of new Orings= few pennies😆
So the grand total@$220 for a improvement that no one should pass by! As per other boar members suggestions I pulled the fitting and valve out of the old pump and installed in the new pump. I used a stock 84 high psi hose. I could have bought the box alone for $50 but i figured the valve and low side hose fitting were worth the extra coin. Plus i pulled it all together to keep dirt etc out untill the install.

[HO455]

What year is your truck? Any problems getting the box to bolt up to the frame.

Looks real good and low buck to boot! A winner on all fronts

[Robznob11]

Frame is 68 gmc