weiand alum intake (egr) and chrome eddy valvecovers/air cleaner - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 10-19-2003, 06:55 PM

i have a weind action plus aluminum intake for sale. it is emmsions legal, and is egr compatible. its rpm range is from idle to 6000 rpm. its perfect if your wanting to build a high performance engine but still have to pass inspection. weind makes the carb flanges on these a special way that will accept a spread bore or square bore carb with no adapter. so your q-jet, eddy or holley carb will bolt right on. also incleded is a block off plate for the egr port. so if you do not want to use egr or just want to hook it up for inspections you can block it off. this is what i did. this intake sells new from summit for $150. i used it for less than a year and selling it for half the price. $75 plus shipping.

here is a link to the add in summit with a pic
http://store.summitracing.com/partde...57#largerimage

it is a little dirty but i will clean it up some and you can perfect it further if you wish. i will get a pic of the actual intake so you can see its condition but it won't be until next weekend.

---------------------------------------------------------------------------------

also selling edelbrock signature series 14 inch air cleaner and signature series small block valve covers.

i just took these pics off of summit but the condition of mine are good. i can get pics next week end. the air cleaner lists new for $25 and the valve covers for new for $30. i will take $30 plus shipping for the whole set (cleaner and covers).

low 84 · 10-20-2003, 12:49 AM

i think the intake is sold.

still got the valve covers and aircleaner, 30 bucks for everything

TODDS 72 · 10-20-2003, 07:30 PM

i'll take the air cleaner and valve covers,whats shipping to 01338,thanks Todd

low 84 · 10-20-2003, 10:06 PM

ok todd. i have to wait till this weekend to pick them up from my buddies garage where i'm storing some parts. i will let you know on shipping as soon as i get them back here. i'll be in touch

TODDS 72 · 10-21-2003, 07:38 AM

sounds good ryan

10-19-2003, 06:55 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	weiand alum intake (egr) and chrome eddy valvecovers/air cleaner i have a weind action plus aluminum intake for sale. it is emmsions legal, and is egr compatible. its rpm range is from idle to 6000 rpm. its perfect if your wanting to build a high performance engine but still have to pass inspection. weind makes the carb flanges on these a special way that will accept a spread bore or square bore carb with no adapter. so your q-jet, eddy or holley carb will bolt right on. also incleded is a block off plate for the egr port. so if you do not want to use egr or just want to hook it up for inspections you can block it off. this is what i did. this intake sells new from summit for $150. i used it for less than a year and selling it for half the price. $75 plus shipping. here is a link to the add in summit with a pic http://store.summitracing.com/partde...57#largerimage it is a little dirty but i will clean it up some and you can perfect it further if you wish. i will get a pic of the actual intake so you can see its condition but it won't be until next weekend. --------------------------------------------------------------------------------- also selling edelbrock signature series 14 inch air cleaner and signature series small block valve covers. i just took these pics off of summit but the condition of mine are good. i can get pics next week end. the air cleaner lists new for $25 and the valve covers for new for $30. i will take $30 plus shipping for the whole set (cleaner and covers). __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-20-2003, 12:49 AM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	i think the intake is sold. still got the valve covers and aircleaner, 30 bucks for everything __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-20-2003, 07:30 PM	#3
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	i'll take the air cleaner and valve covers,whats shipping to 01338,thanks Todd __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

10-20-2003, 10:06 PM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	ok todd. i have to wait till this weekend to pick them up from my buddies garage where i'm storing some parts. i will let you know on shipping as soon as i get them back here. i'll be in touch __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

10-21-2003, 07:38 AM	#5
TODDS 72 Not the nightly winner Join Date: Jul 2002 Location: CHARLEMONT MA.USA Posts: 763	sounds good ryan __________________ 72C10SWB BLUE 350/350 86K10LWB BLUE 5.7 700r4 7.5' fisher plow 93S10XCAB4X4 BLUE 4.3 4L60e 69gmc c10 v8 3 on the tree yellow 72k10 swb 350 3 on the tree green 86k15 swb5.0L 4spd brown

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.