![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Aug 2007
Location: charlestown maryland
Posts: 272
|
Need taller springs for my k30 dually
My k30s springs are sagging terribly and i need to source some replacements can i use a 4 inch lift spring spring from a k10? I only want it to go back up to stock heigh maybe plus an inch ive been looking for a used set of cucv springs since there usually low mileage i figure they wouldent be as beat as mine maybe add a zero rate to it but cant source any but cane across a set of 4 inch front and rear lift springs for a k10 pretty cheap id ony use the front but i was wondering if they would even fit under a one ton or hold the weight? Any suggestions
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2014
Location: Swaledale, IA
Posts: 485
|
Re: Need taller springs for my k30 dually
I think the fronts will fit as I believe all the fronts are the same length. The rears are likely different (k10 used 52" springs, the K20/30 used a 56" spring in the rear). They wouldn't have the same load capacity as your K30 original springs.
I recently bought springs online from one of the spring dealers (mine was Michigan Truck Spring). I would suggest looking at some websites for replacement springs, delivery was pretty quick - less than a week from when I ordered. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2012
Location: cibolo tx
Posts: 1,033
|
Re: Need taller springs for my k30 dually
I fit 37s on my 4 inch springs. I dont think thats what youre looking for. 2.5" might be more what you have in mind.
73-87/91 square body trucks all share the same front springs. 1/2 ton rears are 52" long where 3/4 ton and 1 ton are 56" with varying capacities. If the lift kit you found is blocks in the rear then they will fit your k30. Just ubolts are the only change.
__________________
1985 k5 396/nv4500/203/205 d60/d70 4.56 42 sx2 1991 V3500 350/4l80/205 60/14 4.10 35 toyos. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2016
Location: FLORIDA
Posts: 22
|
Re: Need taller springs for my k30 dually
These are replacement 4-leaf packs for the front of a K30.
https://www.generalspringkc.com/product_p/22-402hd.htm |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2007
Location: charlestown maryland
Posts: 272
|
Re: Need taller springs for my k30 dually
Thanks for that i think ill just order a set of those and if its a little to low add a zero rate i dont want it lifted just more level the rear springs were replaced by the p.o and the front are sagged so its super raked and i hate it. Plus the front bump stops are only 3/4-1" from hitting there so sagged
|
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|