VA Door, fender, disc brakes, cross member, and sway bar for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**biketopia** · 05-09-2017, 01:51 PM

Up for sale is some stuff I've gathered over the years.

Pass side door, not perfect, but still a good OE door for your patina truck or fix it and have a nice door. 80 local pick up preferred, I'd really rather not try to crate this up.
From the same truck, have a 69 pass fender, good patina. One small dent that can easily be accessed from the rear to pop out, needs lower cup, otherwise a solid piece. 30 bucks, again prefer not to crate this either
Have a factory front sway bar off a 71, with all the mounts, will need new rubber, $50 plus shipping. Sold
Trailing arm cross member, perfect shape, no damage. 65 plus shipping
Also have a complete drop out front crossmember from a 71. Complete disc to disc with steering and suspension. $250, I can toss this on a pallet and strap it down if some one were to want it shipped. Sold

All prices are OBO and before shipping and PP fees if not paying by cash or money order. Feel free to ask any questions or for more pictures. All Items are located in Chantilly VA 20151 Also looking for 4th gen camaro parts, a SBC engine (327 350 400) and a th350 or th400.

Name: 20170508_154121.jpg
Views: 783
Size: 44.9 KB

Name: 20170508_154121.jpg
Views: 783
Size: 44.9 KB

Name: 20170508_151714.jpg
Views: 777
Size: 49.0 KB

**biketopia** · 05-09-2017, 01:53 PM

Name: 20170508_151327.jpg
Views: 772
Size: 19.3 KB

Name: 20170508_151401.jpg
Views: 768
Size: 20.6 KB

Name: 20170508_151335.jpg
Views: 766
Size: 18.2 KB

**biketopia** · 05-09-2017, 01:55 PM

Name: 20170508_151442.jpg
Views: 769
Size: 31.6 KB

Name: 20170508_151514.jpg
Views: 770
Size: 31.8 KB

Name: 20170508_151449.jpg
Views: 768
Size: 31.7 KB

**biketopia** · 05-12-2017, 08:23 AM

Bumpity bump bump

71deluxe · 05-12-2017, 06:14 PM

I'll take the '71 factory sway bar with all the mounts. Cost shipped to 98230 please.

**biketopia** · 05-12-2017, 07:47 PM

Quote:

Originally Posted by 71deluxe

I'll take the '71 factory sway bar with all the mounts. Cost shipped to 98230 please.

Ok, I'll find a box and get over to a shipper and let you know.

71deluxe · 05-12-2017, 11:24 PM

Ok thx, pm sent

panhead59 · 05-24-2017, 10:16 AM

You don't have a 5 lug rearend do you ? I've got a rebuildable 350 ci. engine and a th 350. Maybe a trade or some deal? I just need a 5 lug rear for a 68 swb c/10.

panhead59 · 05-24-2017, 10:17 AM

If that front end was "lowered" I would take it.

**biketopia** · 05-24-2017, 01:00 PM

Quote:

Originally Posted by panhead59

You don't have a 5 lug rearend do you ? I've got a rebuildable 350 ci. engine and a th 350. Maybe a trade or some deal? I just need a 5 lug rear for a 68 swb c/10.

Quote:

Originally Posted by panhead59

If that front end was "lowered" I would take it.

Damn, I had the rear end, I sold it at the Spring Carlisle even in April.

You can lower that front end haha, looking for a pancaked cross member or one on springs/spindles?

**biketopia** · 05-24-2017, 01:00 PM

All items still for sale (sway bar was not sold)

Brave71 · 06-11-2017, 01:57 PM

How much would shipping be to 89015 for sway bar?

**biketopia** · 06-12-2017, 08:19 AM

Quote:

Originally Posted by Brave71

How much would shipping be to 89015 for sway bar?

I'll check and let you know.

**biketopia** · 06-15-2017, 11:30 AM

PM'd you guys about shipping on the sway bar.

Brave71 · 06-15-2017, 11:35 AM

I will pass on the sway bar..thanks

**biketopia** · 06-15-2017, 12:39 PM

Berch, you're up

Bennett68C10 · 07-01-2017, 05:51 PM

Do you still have the complete 71 front crossmember? How much shipped to NJ 08753?

**biketopia** · 07-05-2017, 07:46 AM

Yea I still have the front crossmeber. I'll have to crate it and find a shipper. Do you have a fastenall near you? Or are you possibly going to the Carlisle all truck show?

Bennett68C10 · 07-05-2017, 10:27 PM

I may be able to come pick it up, it's about a 4 hour ride from NJ. I'm sure shipping would be ridiculous! Would you do $175 picked up?

**biketopia** · 07-06-2017, 06:43 AM

Quote:

Originally Posted by Bennett68C10

I may be able to come pick it up, it's about a 4 hour ride from NJ. I'm sure shipping would be ridiculous! Would you do $175 picked up?

Picked up from Carlisle?

Bennett68C10 · 07-06-2017, 10:50 AM

Quote:

Originally Posted by biketopia

Picked up from Carlisle?

No, not going to Carlisle. I can come pick it up in a Virginia!

**biketopia** · 07-06-2017, 12:47 PM

Quote:

Originally Posted by Bennett68C10

No, not going to Carlisle. I can come pick it up in a Virginia!

Oh, hot damn!! Yea we can working something out then. I'm going to PM you.

**ScottH** · 07-06-2017, 10:59 AM

Is sway bar still available?

**biketopia** · 07-06-2017, 12:46 PM

Quote:

Originally Posted by ScottH

Is sway bar still available?

User NvrDun71 was the next in line after the other two and I messaged him to let him know he was "up" yesterday. He told me potentially he was still interested but haven't heard back. I don't hear back soon then ScottH you're up.

**ScottH** · 07-06-2017, 01:28 PM

Well if u work something out with Keith, I would take it as long as he wouldnt mind picking it up for me. If we get that far I will check with him of course.

Thanks
Scott

05-09-2017, 01:51 PM	#1
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Door, fender, disc brakes, cross member, and sway bar for sale Up for sale is some stuff I've gathered over the years. Pass side door, not perfect, but still a good OE door for your patina truck or fix it and have a nice door. 80 local pick up preferred, I'd really rather not try to crate this up. From the same truck, have a 69 pass fender, good patina. One small dent that can easily be accessed from the rear to pop out, needs lower cup, otherwise a solid piece. 30 bucks, again prefer not to crate this either Have a factory front sway bar off a 71, with all the mounts, will need new rubber, $50 plus shipping. Sold Trailing arm cross member, perfect shape, no damage. 65 plus shipping Also have a complete drop out front crossmember from a 71. Complete disc to disc with steering and suspension. $250, I can toss this on a pallet and strap it down if some one were to want it shipped. Sold All prices are OBO and before shipping and PP fees if not paying by cash or money order. Feel free to ask any questions or for more pictures. All Items are located in Chantilly VA 20151 Also looking for 4th gen camaro parts, a SBC engine (327 350 400) and a th350 or th400. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350 Last edited by biketopia; 07-09-2017 at 01:07 PM.

05-09-2017, 01:53 PM	#2
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

05-09-2017, 01:55 PM	#3
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

05-12-2017, 08:23 AM	#4
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale Bumpity bump bump __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

05-12-2017, 06:14 PM	#5
71deluxe Registered User Join Date: Feb 2017 Location: Surrey BC Posts: 69	Re: Door, fender, disc brakes, cross member, and sway bar for sale I'll take the '71 factory sway bar with all the mounts. Cost shipped to 98230 please.

05-12-2017, 11:24 PM	#7
71deluxe Registered User Join Date: Feb 2017 Location: Surrey BC Posts: 69	Re: Door, fender, disc brakes, cross member, and sway bar for sale Ok thx, pm sent

05-24-2017, 10:16 AM	#8
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 473	Re: Door, fender, disc brakes, cross member, and sway bar for sale You don't have a 5 lug rearend do you ? I've got a rebuildable 350 ci. engine and a th 350. Maybe a trade or some deal? I just need a 5 lug rear for a 68 swb c/10.

05-24-2017, 10:17 AM	#9
panhead59 Registered User Join Date: Feb 2012 Location: Vinton, Va. Posts: 473	Re: Door, fender, disc brakes, cross member, and sway bar for sale If that front end was "lowered" I would take it.

05-24-2017, 01:00 PM	#11
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale All items still for sale (sway bar was not sold) __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

06-11-2017, 01:57 PM	#12
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: Door, fender, disc brakes, cross member, and sway bar for sale How much would shipping be to 89015 for sway bar?

06-15-2017, 11:30 AM	#14
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale PM'd you guys about shipping on the sway bar. __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

06-15-2017, 11:35 AM	#15
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: Door, fender, disc brakes, cross member, and sway bar for sale I will pass on the sway bar..thanks

06-15-2017, 12:39 PM	#16
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale Berch, you're up __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350

07-01-2017, 05:51 PM	#17
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Door, fender, disc brakes, cross member, and sway bar for sale Do you still have the complete 71 front crossmember? How much shipped to NJ 08753? __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-05-2017, 07:46 AM	#18
biketopia Senior Member Join Date: Jul 2015 Location: Warrenton VA Posts: 1,033	Re: Door, fender, disc brakes, cross member, and sway bar for sale Yea I still have the front crossmeber. I'll have to crate it and find a shipper. Do you have a fastenall near you? Or are you possibly going to the Carlisle all truck show? __________________ 71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop. 07 Silverado Classic 2wd 95 Camaro 427SBC/TH350



Register or Log In To remove these advertisements.

07-05-2017, 10:27 PM	#19
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Door, fender, disc brakes, cross member, and sway bar for sale I may be able to come pick it up, it's about a 4 hour ride from NJ. I'm sure shipping would be ridiculous! Would you do $175 picked up? __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

07-06-2017, 10:59 AM	#23
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Door, fender, disc brakes, cross member, and sway bar for sale Is sway bar still available? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

07-06-2017, 01:28 PM	#25
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: Door, fender, disc brakes, cross member, and sway bar for sale Well if u work something out with Keith, I would take it as long as he wouldnt mind picking it up for me. If we get that far I will check with him of course. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.