![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2011
Location: Fairview Park, Ohio
Posts: 1,031
|
Window vent gasket installation
I rebuilt my window vent gaskets with new rivits and locks.
Here's a tip for those looking to do the gaskets install The gasket that goes around the frame needs to be installed past a grove in the gasket and into the frame. It's just about impossible dry. I used some dish soap around the frame first and it work fantastic. Take a paste brush and brush the dish soap inside the metal track and on edges. Gasket I'll go in very easily. I first tried to apply the dish soap to the gasket itself and surprisingly it didn't work well Just thought I would pass it along for the next guy. I should have my restoration on the road in 3-4 weeks. Can't wait!!!!! Mark Posted via Mobile Device |
![]() |
![]() |
![]() |
#2 |
20' Daredevil (Ret)
![]() Join Date: May 2003
Location: Jefferson State
Posts: 13,623
|
![]()
Good info to know, thanks.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|