|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-22-2003, 04:26 AM
|
#1 |
|
Sisyphus was my mentor!
 
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
What size of screw holds on the chrome doorsill plates?
The title sez it all - What size of screw holds on the chrome doorsill plates? I need to know because I got new ones & the old screws arent comming out so I'll have to grind them off. Thanx.
 
__________________
passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
10-22-2003, 06:57 AM
|
#2 |
|
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
I used some small button head bolts (the kind you use a hex key to tighten up) with washers and nuts underneath. Looks good, the only problem is I wanted stainless but couldn't find any at the time so had to have blacked ones. I'll be replacing them with stainless when I do the interior over this winter.
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
