350 4 bolt main TBI - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**bigunde** · 10-23-2003, 12:53 PM

I have a complete running(smokes some)350 tbi engine from a 1990 2500 chevy truck.Asking $300 or offer

68_c10_on20s · 10-24-2003, 08:41 PM

is the block a stardard bore or ever been rebuilt and crank as well im wanting to rebuild mine but having another would be alot easier also you know if its a rollor motor or not ive heard some are some arnt only way to tell is pull intake

**bigunde** · 10-27-2003, 09:29 PM

i know it is all standard and it runs.i am not sure on the roller.

GSXMEN · 10-27-2003, 10:25 PM

Being a truck engine, it should be a hyd. flat tappet cam. BUT...the block still has the provisions for the roller cam setup. Just hit the junkyard and pull all the roller stuff out of a Caprice or something.

phantom dually · 10-27-2003, 11:59 PM

have a 94 with a 305. were these roller motors??

68_c10_on20s · 10-28-2003, 06:14 PM

i have a new hyd cam in my garage i want to rebuild the motor in my truck but only need a short block will you seperate and ship the short block to Houston and if so price please i have a good set of heads and was planning on rebuilding my motor but if i can get another block at a good price i will....Steve

CEDJUNIOR · 10-29-2003, 11:35 AM

None of the truck engines were roller till the Vortecs came out in '96, although the blocks are already machined and stuff to drop a roller cam set in.

**bigunde** · 10-29-2003, 11:36 AM

anyone want it?

10-23-2003, 12:53 PM	#1
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	350 4 bolt main TBI I have a complete running(smokes some)350 tbi engine from a 1990 2500 chevy truck.Asking $300 or offer

10-24-2003, 08:41 PM	#2
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	motor is the block a stardard bore or ever been rebuilt and crank as well im wanting to rebuild mine but having another would be alot easier also you know if its a rollor motor or not ive heard some are some arnt only way to tell is pull intake __________________ 93 Fleet Budget Build http://s150.photobucket.com/albums/s...zted71/hoopty/

10-27-2003, 10:25 PM	#4
GSXMEN Registered User Join Date: Aug 2002 Location: Upstate, NY Posts: 337	Being a truck engine, it should be a hyd. flat tappet cam. BUT...the block still has the provisions for the roller cam setup. Just hit the junkyard and pull all the roller stuff out of a Caprice or something. __________________ Scott

10-27-2003, 11:59 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	have a 94 with a 305. were these roller motors?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-28-2003, 06:14 PM	#6
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	motor i have a new hyd cam in my garage i want to rebuild the motor in my truck but only need a short block will you seperate and ship the short block to Houston and if so price please i have a good set of heads and was planning on rebuilding my motor but if i can get another block at a good price i will....Steve __________________ 93 Fleet Budget Build http://s150.photobucket.com/albums/s...zted71/hoopty/

10-27-2003, 09:29 PM	#3
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	i know it is all standard and it runs.i am not sure on the roller.

10-29-2003, 11:35 AM	#7
CEDJUNIOR Registered User Join Date: Mar 2003 Location: Irving/Valley Ranch, Tx Posts: 897	None of the truck engines were roller till the Vortecs came out in '96, although the blocks are already machined and stuff to drop a roller cam set in. __________________ GM RPO Codes '95 K1500 4x4 Ext Cab 5.7 TBI NV4500 Tranny, 14 Bolt swapped in, locker, 3.73's

10-29-2003, 11:36 AM	#8
bigunde Rusty Rockerfeller Join Date: May 2003 Location: South Georgia Posts: 1,631	anyone want it?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.