TX WTB NON Deluxe Choke Knob - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Jason Banks** · 06-23-2017, 05:16 PM

I'm looking for a replacement choke knob. I want the one without the stainless center. ALL Black.

I installed a new choke cable and now my knob slips off easily.

I found the part number for the Deluxe one and there are a few NOS on eBay. But, I can't find the part number for the NON Deluxe. If anyone knows?

**Ironhorse** · 06-23-2017, 06:23 PM

Does your choke cable have a threaded end or does the choke knob mount using a set screw similar to a washer knob? I "may" have a knob but need to look in the odd parts stash. Will get back to you after I find the one I have.

**Jason Banks** · 06-23-2017, 10:18 PM

Threaded...not set screw

**Ironhorse** · 06-24-2017, 09:53 AM

Found the knob in the odd parts stash. Standard black face with no stainless center. Knob measures 1'' in length, shaft hole measure 3/16'' dia, you can see the threaded inner section but the threads must have been a bit on the weak side. Somewhere along the way a small heli-coil inset has been used, still inside the know. No breaks or cracks, some very minor outer edge issues on the face. If interested I can try to get pics of the threads and the face but my camera is not great for close up shots. $10 shipped, money order, do not have Paypal.

**Ironhorse** · 06-24-2017, 07:10 PM

Any interest in the choke knob? Not NOS but see no reason why it would not still be useable.

06-23-2017, 05:16 PM	#1
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,623	WTB NON Deluxe Choke Knob I'm looking for a replacement choke knob. I want the one without the stainless center. ALL Black. I installed a new choke cable and now my knob slips off easily. I found the part number for the Deluxe one and there are a few NOS on eBay. But, I can't find the part number for the NON Deluxe. If anyone knows?

06-23-2017, 06:23 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB NON Deluxe Choke Knob Does your choke cable have a threaded end or does the choke knob mount using a set screw similar to a washer knob? I "may" have a knob but need to look in the odd parts stash. Will get back to you after I find the one I have. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-23-2017, 10:18 PM	#3
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,623	Re: WTB NON Deluxe Choke Knob Threaded...not set screw

06-24-2017, 09:53 AM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB NON Deluxe Choke Knob Found the knob in the odd parts stash. Standard black face with no stainless center. Knob measures 1'' in length, shaft hole measure 3/16'' dia, you can see the threaded inner section but the threads must have been a bit on the weak side. Somewhere along the way a small heli-coil inset has been used, still inside the know. No breaks or cracks, some very minor outer edge issues on the face. If interested I can try to get pics of the threads and the face but my camera is not great for close up shots. $10 shipped, money order, do not have Paypal. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

06-24-2017, 07:10 PM	#5
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB NON Deluxe Choke Knob Any interest in the choke knob? Not NOS but see no reason why it would not still be useable. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.