|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-13-2017, 03:37 PM
|
#1 |
|
Senior Member
 Join Date: Jun 2015
Location: Moose Jaw, SK
Posts: 511
|
What size bolts for 292 heads and bellhousing?
Hi. This info seems oddly hard to come by. I just acquired a 292, out of a 68 c10 I think. It is sitting in the bed of a parts truck currently. I need to first hook it up to the engine hoist, sounds like by the head bolts is the way to go. Sounds like purchase some slightly longer grade 8 bolts to hook up the chains - what size bolts do I need to purchase?
Second, need to mount onto engine stand. As far as I can tell, I need 3/8 coarse thread bolts? Can someone confirm for me? Thanks!
__________________
1961 GMC half ton, short step, Canadian model. Just starting work on it. |
|
|
|
08-13-2017, 06:12 PM
|
#2 |
|
Registered User
Join Date: Feb 2016
Location: Georgetown, TX and Bragg Creek, AB
Posts: 177
|
Re: What size bolts for 292 heads and bellhousing?
3/8" NC for the bell housing
Not 100%, but believe 7/16" NC for the head bolts |
|
|
|
|
08-13-2017, 07:03 PM
|
#3 |
|
Senior Member
Join Date: Jun 2015
Location: Moose Jaw, SK
Posts: 511
|
Re: What size bolts for 292 heads and bellhousing?
Thanks. Seems like the head bolts are 1/2 by 4". Just bought some 1/2 by 5", so will confirm when I try and thread them in.
__________________
1961 GMC half ton, short step, Canadian model. Just starting work on it. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
