VATS removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 08-24-2017, 02:17 PM

Where's the best place to have the VATS removed to start an engine on a test stand.

**mongocanfly** · 08-24-2017, 02:24 PM

the guy that setup my ecm removed it...so i would think any ecm programmer guy can do it..but I think they have to buy the license to do it..

BR3W CITY · 08-24-2017, 10:14 PM

Quote:

Originally Posted by krue

Where's the best place to have the VATS removed to start an engine on a test stand.

Find a tuner in your area who you would work with for a full tune (you'd want one for the trans etc anyway) and just ask them if they can do a bench flash. i.e. flash without having the actual car there. The reason is that once you license the credits through HP Tuners, your licensed through the tuners dongle. Doing it through the same tuner, means you won't risk getting doubled on credits, and the tuner is also more likely to give you a break on costs if your return biz is built in. I'm assuming you have something on the test bed that your planning on putting into a vehicle.

Doing a flash for a bench-run only engine is a little different. If you need that, I'll set you up with my tuner.

krue · 08-24-2017, 10:27 PM

In this case I have an 01 4.8l in a truck that the steering column has been cut out of. I want to see if the engine runs so I know what to do with it. I plan on the full tune on the 6.0l going into my truck but for now I just need to see if the 4.8l runs. If it runs I will probably rathole it as a sparefor one of my boys truck since they both have 4.8l.

aggie91 · 08-25-2017, 09:25 AM

You have to have a PC with tuning software hooked up to the PCM to remove the vats.

You can send the PCM out to the guy that runs the lt1swap.com web site. He can remove the VATS and other non-essentials for $75 that includes return shipping, takes about a week total from when you ship it out to when you get it back.

**nsb29** · 08-25-2017, 09:50 AM

if your kids have 4.8 just switch ecm's

krue · 08-25-2017, 04:14 PM

Quote:

Originally Posted by nsb29

if your kids have 4.8 just switch ecm's

Don't see how that will help in a truck with no steering column.

**nsb29** · 08-26-2017, 10:14 AM

Quote:

Originally Posted by krue

Don't see how that will help in a truck with no steering column.

was not thinking that your kids were still in stock trucks

krue · 08-26-2017, 02:26 PM

Quote:

Originally Posted by nsb29

was not thinking that your kids were still in stock trucks

Sorry, yeah one has an 02 the other an 03.

08-24-2017, 02:17 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	VATS removal Where's the best place to have the VATS removed to start an engine on a test stand. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-24-2017, 02:24 PM	#2
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: VATS removal the guy that setup my ecm removed it...so i would think any ecm programmer guy can do it..but I think they have to buy the license to do it..

08-24-2017, 10:27 PM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: VATS removal In this case I have an 01 4.8l in a truck that the steering column has been cut out of. I want to see if the engine runs so I know what to do with it. I plan on the full tune on the 6.0l going into my truck but for now I just need to see if the 4.8l runs. If it runs I will probably rathole it as a sparefor one of my boys truck since they both have 4.8l. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-25-2017, 09:25 AM	#5
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: VATS removal You have to have a PC with tuning software hooked up to the PCM to remove the vats. You can send the PCM out to the guy that runs the lt1swap.com web site. He can remove the VATS and other non-essentials for $75 that includes return shipping, takes about a week total from when you ship it out to when you get it back. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-25-2017, 09:50 AM	#6
nsb29 Senior Member Join Date: Feb 2014 Location: new smyrna beach fl / 29 palms cal Posts: 1,727	Re: VATS removal if your kids have 4.8 just switch ecm's

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.