![]() |
|
![]() |
#1 |
Registered User
Join Date: Jun 2003
Location: Fort McMurray, Alberta, Canada
Posts: 513
|
Ahhh Help!
OK so here is the deal i took the pressure hose off the power steering system. On the reservoir the bigger nut game off instead of the smaller one which made the internals of the reservoir come out, which way do they go back in. There is one piece that is flat on one side and has a smaller screened hole on the other end, which way does this go in? any one? i need help fast so i can get this back together!!
Thanks Ben
__________________
Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2003
Location: Fort McMurray, Alberta, Canada
Posts: 513
|
Here is a picture of it....
__________________
Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2003
Location: Fort McMurray, Alberta, Canada
Posts: 513
|
Worry no more! lol i do realize this a fairly bizar question and it hasnt been up for more then a few hours but i fixed it now. All it took was for some one else to look at it and see the obviouse! thanks any way, Ben
P.s. for anyone else who may want to know the flat side goes out and the screened end goes in.
__________________
Ben 1983 Silverado SWB 305 2002 Silverado Extended Cab 5.3 http://members.shaw.ca/bkennett |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|