Bed Board

[mgb]

Can I buy just one board for the bed of a 68 stepside?

[harpo231]

3/4 in oak or pine can be had anywhere .

[mgb]

Originally Posted by harpo231

3/4 in oak or pine can be had anywhere .

I don't have the resource for the dado and groove

[harpo231]

Just need a router , stop at a cabinet shop, will take 5 mins

[bill3rail]

Did you find the board dimensions?
I have the link at home, but will search for it in a few minutes.

Bill

[bill3rail]

I would guess that shipping for one piece would cost more than you could have it cut for locally.

GMC Paul's has the dimensions.
Thank you Paul!

http://www.gmcpauls.com/47-72_BedWood_Info.htm


Dimensions
A. 3/4" (board thickness)
B. 1/4"
C. 1/4"
D. 1/2"
E. 1/8"

[rockyrivermark]

Originally Posted by bill3rail

I would guess that shipping for one piece would cost more than you could have it cut for locally.

GMC Paul's has the dimensions.
Thank you Paul!

http://www.gmcpauls.com/47-72_BedWood_Info.htm


Dimensions
A. 3/4" (board thickness)
B. 1/4"
C. 1/4"
D. 1/2"
E. 1/8"

Those are the dimensions I used, perfect fit.
Table saw and dado blades certainly makes it easier. Cabinet maker by trade so that part of the resto was nice.
Certainly tougher with a router, router in a table would work.
Anyone in Cleveland area I would be happy to assist milling for another board member.
Like others noted, find a shop close to you. They may just do it for a 12 pack of long necks.
Mark

[mgb]

Originally Posted by bill3rail

I would guess that shipping for one piece would cost more than you could have it cut for locally.

GMC Paul's has the dimensions.
Thank you Paul!

http://www.gmcpauls.com/47-72_BedWood_Info.htm


Dimensions
A. 3/4" (board thickness)
B. 1/4"
C. 1/4"
D. 1/2"
E. 1/8"

Mark and Bill Thanks for the info. I appreciate your time

[darrellyates]

Originally Posted by mgb

Can I buy just one board for the bed of a 68 stepside?

Mar-K in Oklahoma City, OK, will sell you one board only if you want it. They are a great company to work with!

[mgb]

Originally Posted by darrellyates

Mar-K in Oklahoma City, OK, will sell you one board only if you want it. They are a great company to work with!

I'm really looking for an old board, maybe where someone has redone their bed, and has a board that's still good. I'm not doing a new bed, just replacing a rotten board. I'm in NC and willing to drive a little as I know it would be expensive to ship

[custom10nut]

Originally Posted by mgb

I'm really looking for an old board, maybe where someone has redone their bed, and has a board that's still good. I'm not doing a new bed, just replacing a rotten board. I'm in NC and willing to drive a little as I know it would be expensive to ship

So stain it with "Vinegar and Steel Wool" stain. Then put it out in the sun for a few days. It'll weather it to match your original, or close to it anyway

[68Stepbed]

Originally Posted by mgb

I'm really looking for an old board, maybe where someone has redone their bed, and has a board that's still good. I'm not doing a new bed, just replacing a rotten board. I'm in NC and willing to drive a little as I know it would be expensive to ship

Are you willing to make it to east TN? I can hook you up with a board and make it look how you want.

[mgb]

Originally Posted by 68Stepbed

Are you willing to make it to east TN? I can hook you up with a board and make it look how you want.

Thanks Matt, I guess I'm going to have to put in a new bed. When I started tearing it apart, it turned out to be worse than I thought.

[68Stepbed]

Originally Posted by mgb

Thanks Matt, I guess I'm going to have to put in a new bed. When I started tearing it apart, it turned out to be worse than I thought.

I can hook you up with that, too.

[RPBurris]

Anyone with even just a table saw can make that board. If you were closer i would do it for you. Maybe even try a full service lumber yard? Not a big box of course.

[custom10nut]

Well, if you're going to replace the whole thing, it's pretty easy to mill them yourself. Use the de ensign that were posted already, and take your time cutting. For the wood, go to a lumber yard that cuts actual demensional lumber ( not the big name stores), and you an get most anything you want. I can say this because this is what I did. I used yellow pine stained it to my liking, and coated it with BoiledLinseed Oil to protect it.