Equus 3-3/8 Inch Tachometer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lutronjim · 02-20-2018, 02:58 PM

Anyone happen to know if the Equus 3-3/8 Inch Tachometer
Part #: 6088 Line: EQU will work with LS. It has capability to flush mount and can be set to 4 cylinder. My connect and cruise package has a wire to drive a tach.

Thanks

BR3W CITY · 02-20-2018, 11:33 PM

It should. Some tach's need a pullup resistor to properly display the readings. I believe there was a thread a long while back with resistor values if needed. I used a resistor on my swap when I originally did it.

02-20-2018, 02:58 PM	#1
lutronjim Registered User Join Date: Dec 2013 Location: Dunwoody,Ga Posts: 443	Equus 3-3/8 Inch Tachometer Anyone happen to know if the Equus 3-3/8 Inch Tachometer Part #: 6088 Line: EQU will work with LS. It has capability to flush mount and can be set to 4 cylinder. My connect and cruise package has a wire to drive a tach. Thanks

02-20-2018, 11:33 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Equus 3-3/8 Inch Tachometer It should. Some tach's need a pullup resistor to properly display the readings. I believe there was a thread a long while back with resistor values if needed. I used a resistor on my swap when I originally did it. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.