What is the name of the part between the bumper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

AustinBelair · 03-06-2018, 11:30 PM

and the body at the rear? I put a sport bumper on this 87 and I those panels that cover up the brackets. I noticed there is a little bracket mounted that the panels bolt to, I need that too. I cannot find these parts.

I bought the bumper off of a K5 not knowing the brackets will not work on my 1/2 ton truck. That sucks. The outermost brackets work but I don't feel safe knowing there are no middle brackets and NOBODY sells the just the middle brackets that I can find.

sweetk30 · 03-06-2018, 11:37 PM

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40

didnt look to hard did you ?

i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all .

AustinBelair · 03-06-2018, 11:40 PM

Quote:

Originally Posted by sweetk30

http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40

didnt look to hard did you ?

i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all .

Gravel shield. Ah I didn't even think of LMC. I try to avoid them but if they are the only ones that have it. I might have to look for used on the brackets.

Thanks man

sweetk30 · 03-06-2018, 11:51 PM

i didnt find used brackets and i dont care much for the lmc crap also . but they fit good and worked . no real rework required .

03-06-2018, 11:30 PM	#1
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 300	What is the name of the part between the bumper and the body at the rear? I put a sport bumper on this 87 and I those panels that cover up the brackets. I noticed there is a little bracket mounted that the panels bolt to, I need that too. I cannot find these parts. I bought the bumper off of a K5 not knowing the brackets will not work on my 1/2 ton truck. That sucks. The outermost brackets work but I don't feel safe knowing there are no middle brackets and NOBODY sells the just the middle brackets that I can find. __________________ My mother is a recent cancer survivor and this truck build is for her

03-06-2018, 11:37 PM	#2
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: What is the name of the part between the bumper http://www.lmctruck.com/icatalog/cc/full.aspx?Page=40 didnt look to hard did you ? i used a suburban bumper on my 2wd with new inner brackets from lmc . no problems at all . Attached Images __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

03-06-2018, 11:51 PM	#4
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: What is the name of the part between the bumper i didnt find used brackets and i dont care much for the lmc crap also . but they fit good and worked . no real rework required . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.