F/S OE 72 Big Block Parts, Brackets, Stove Pipe, Air Cleaner, Towers and/or Request?

[Classic Bowties]

Large group of OE big block short water pump parts removed from several parted BBC 396/402 trucks, no bracketry or pulley guesswork here, all guaranteed complete and correct original GM parts. The shipping cost are not included in the below listed pricing and we will offer combined shipment on multiple purchases here in thread or with any of our other parts listings. if interested, online funds can be sent via Zelle and CashApp, Credit Card over the phone or Check/Money Order by mail. Thanks, Mel


***Update*** We have decided to let this big block parts F/S thread run on and we'll add parts here in one spot for simplicity and organization. So for any other BBC parts needs, year specific request or for single bracket or pulley needs just inquire in thread, if items are on hand we can add pictures and pricing here in the thread.


#1 } BBC full 9 pc. A/C compressor bracket setup $450., will sell as a 7 pc. setup w/o rear rod & exh. manifold brace for $375. ***Qty. 5 Sets Sold/Shipped***

#2 } BBC 3 pc. A/C pulley set: 2 groove w/p pulley, 2 groove inner crank pulley and 1 groove outer crank add on p/s pulley. $200. ***Qty. 7 Sets Sold/Shipped*** We do have more OE BBC pulleys pulled/ready to ship, just ask.

#3 } BBC 72 LH/RH Tower set w/clam shells and clam shell to motor mount bolts. $250. ***Qty. 5 Setups Sold/Shipped*** We also have 68-71 style BBC stands pulled/ready to ship. ***Update*** We just added another 72 BBC tower setup in thread post #150.

#4 } BBC 72 3 pc. alternator mounting bracket setup. $200. ***Qty. 7 Sets Sold/Shipped***We do have more pulled/ready to ship.

#5 } BBC Air cleaner and spacer setup, riser has both OE tower clamps yet and correct BBC arrestor to valve cover tube. ***Qty. 4 Setups Sold/Shipped***

#6 } BBC Exhaust manifold heat shield tin and stove pipe setup. $300. ***Qty. 5 Setups Sold/Shipped*** ***Update*** We just added another complete OE 70-72 BBC LH exhaust manifold heat shield tin and stove pipe setup in post #186

#7 } BBC Remote fill P/S pump setup with both mounting brackets, w/537DC pulley on pump and fill reservoir w/cap, setup pictured in post #11. $325. ***Qty. 5 Setups Sold/Shipped***

***Update*** The below listed BBC pulley setup and the BBC 70-71 style alternator brackets that are pictured in post #168 are now available to anyone interested, we also just added some BBC/TH400 auto high hump tunnel covers to thread in post #169

#8 } BBC 3 pc. pulley setup (Non-A/C) including w/p pulley, inner crank pulley and add on outer crank pulley for p/s, pictured in post #168. $200.

#9 } BBC 70-71 style 2 pc. alternator mounting bracket setup, pictured in post #168. $150.

#10 } BBC 68-71 style LH/RH engine stand/tower set, pictured in post #175. $150. ***Qty. 3 Sets Sold/Shipped*** We have more pulled/ready to ship.

#11 } BBC/Th400 auto high hump bolt in transmission tunnel covers in 506 dk. olive & 516 orange, pictured in post #169. $150. ea. ***Qty. 5 Sold/Shipped*** We do have more of these BBC/Th400 high hump (no shift hole) covers pulled/ready to ship, just ask.

#12 } BBC A/C compressor lower main support brackets, have three singles available pictured in post #204. $95. ea.

#13 } BBC Remote fill P/S 537DC single groove pump pulley, pictured in post #205. $95.

.
***For any return/past customers & friends***
Before sending of any funds, please wait for a confirmed total and instructions for
sending as our payment account info has been changed as of Jan. 2023. Thanks...

[Classic Bowties]

More pics...

[1972larry]

Do you have a clutch pivot bracket. The one on side of block

[Cali72K20]

Do you have any power steering brackets available for 72 402 ? Thank you!

[Classic Bowties]

Originally Posted by Cali72K20

Do you have any power steering brackets available for 72 402 ? Thank you!

Yes, was still waiting to hear back from BLT-NT-BOT on that other BBC P/S setup that was added/offered in his WTB thread, if he passes on it you are up next on the whole setup, or are you only needing the two BBC SWP remote fill p/s pump mounting brackets? Mel

[Cali72K20]

Originally Posted by Classic Bowties

Yes, was still waiting to hear back from BLT-NT-BOT on that other BBC P/S setup that was added/offered in his WTB thread, if he passes on it you are up next on the whole setup, or are you only needing the two BBC SWP remote fill p/s pump mounting brackets? Mel

I will take the whole set up if he passes on it, thank you!

[Classic Bowties]

Originally Posted by Cali72K20

I will take the whole set up if he passes on it, thank you!

Yes, I did get a confirmation from him, see our above reply for you in post #11. Thanks, Mel

[blazerowner71]

I need a set of pulleys for a bcc with air ,also a set of bbc exhaust manifolds, please let me know if you have any, thanks Adam, o by the way you need to clear some messages from your PM

[Classic Bowties]

Bringing this thread of OE BBC parts back up ttt, if there are any other BBC related parts request just let us know. Thanks, Mel

[Classic Bowties]

Originally Posted by Cali72K20

I will take the whole set up if he passes on it, thank you!

We can get the 72 BBC P/S setup with both mounting brackets, pump pulley, and remote fill reservoir w/hose to you in CA. 93436 for $23.61 shipped via FedEx ground, total transit time will be 2 days. The provided address is a commercial/business listing correct? A non-residential/commercial address was used for the above quote and it does affect the shipping charge when using FedEx. Will return our info now for sending payment via paypal. Thanks, Mel

[Classic Bowties]

Originally Posted by Cali72K20

I will take the whole set up

The BBC power steering setup shipped out via FedEx on Wed. 03/28, as of this evening the FedEx website is projecting that you should see the box on Fri. 03/30 by the end of the day. We had to swap out the lower pump cradle bracket because the one that was originally pictured (installed on truck yet) was cracked and was being held together while everything was tight, once I loosened the bolts up to remove the setup the broken ear fell off, see red arrow. I sent the top pictured OE BBC p/s lower cradle bracket in its place. Thanks again, Mel

[Classic Bowties]

Originally Posted by Cali72K20

Do you have any power steering brackets available for 72 402 ? Thank you!

Per your reply in that other thread, you are next up on this BBC remote fill P/S setup at $275., can have the setup pulled and shipped within 24 hours of payment, will need a zip code to figure your shipping options out. Thanks, Mel

[Cali72K20]

Originally Posted by Classic Bowties

Per your reply in that other thread, you are next up on this BBC remote fill P/S setup at $275., can have the setup pulled and shipped within 24 hours of payment, will need a zip code to figure your shipping options out. Thanks, Mel

I sent you a PM.

[Njeiv]

Do you have an entire set up for a short water pump big black? If so I’ll take it

[Classic Bowties]

Originally Posted by Njeiv

Do you have an entire set up for a short water pump big black? If so I’ll take it

Will need some more info from you, are we talking about brackets and pulleys and with or without A/C and P/S and what year setup? While all of the 68-72 GM 396/402 trucks were short water pump with parts that can be made to work between the years but some of the brackets and pulley's were year specific. As an example, here are a few of our old file pics showing some of the differences on the big block alternator brackets. Mel
.

[Njeiv]

All Brackets and pulleys for Alternator, air conditioning and power steering 68-69 Would probably be preferred if possible

[Joesjunk]

Does the air cleaner have pretty nice original paint? And would you just sell it by its self? Thanks

[bcnya2]

I will take the 3- piece alternator brackets

[Classic Bowties]

Originally Posted by Joesjunk

Does the air cleaner have pretty nice original paint? And would you just sell it by its self? Thanks

Yes, the air cleaner appears to be original paint and it's in way nicer shape than most that come in, was wanting to sell this pair as listed. Thanks, Mel

[Joesjunk]

Originally Posted by Classic Bowties

Yes, the air cleaner appears to be original paint and it's in way nicer shape than most that come in, was wanting to sell this pair as listed. Thanks, Mel

Wes, if it gets to me I'll take them both. Thanks

[Utahboy]

I will take the following. Please send PM with payment info. Thanks

$125. / Air cleaner and spacer setup, riser has both OE tower clamps yet and correct arrestor to valve cover tube.
$225. / Exhaust manifold heat shield and stove pipe setup.

[Classic Bowties]

Originally Posted by bcnya2

I will take the 3- piece alternator brackets

We can ship this setup to you via USPS priority large box for $18.90, let us know how you would like to send payment and we will get that info returned to you. Thanks

Originally Posted by Utahboy

I will take the following. Please send PM with payment info. Thanks

$125. / Air cleaner and spacer setup, riser has both OE tower clamps yet and correct arrestor to valve cover tube.
$225. / Exhaust manifold heat shield and stove pipe setup.

Okay, will need a shipping Zip to figure out your FedEx shipping cost, confirm if residential or commercial/business for the ground shipment quote. The payment options are listed in the first post, let us know your preferred method and we will return that info to you. Thanks, Mel

[bcnya2]

I can PayPal you tonight......let me know your papal address

Originally Posted by Classic Bowties

We can ship this setup to you via USPS priority large box for $18.90, let us know how you would like to send payment and we will get that info returned to you. Thanks



Okay, will need a shipping Zip to figure out your FedEx shipping cost, confirm if residential or commercial/business for the ground shipment quote. The payment options are listed in the first post, let us know your preferred method and we will return that info to you. Thanks, Mel

[Classic Bowties]

Originally Posted by Utahboy

I will take the following. Please send PM with payment info. Thanks

$125. / Air cleaner and spacer setup, riser has both OE tower clamps yet and correct arrestor to valve cover tube.
$225. / Exhaust manifold heat shield and stove pipe setup.

We can get the above requested BBC parts to you in MI. 48451 for $39.55 shipped via FedEx home delivery/Res. (23" x 20" x 7" @ 12 Lbs.), total transit time will be 4 business days. Will fwd the info now for sending payment via paypal. Thanks, Mel

[Classic Bowties]

Originally Posted by Utahboy

I will take the following. Please send PM with payment info. Thanks

$125. / Air cleaner and spacer setup, riser has both OE tower clamps yet and correct arrestor to valve cover tube.
$225. / Exhaust manifold heat shield and stove pipe setup.

Your box has been shipped out via FedEx on Wed. 03/28, as of this evening the FedEx website is projecting that you should see the box next Tue. 04/03 by the end of the day. Thanks again, Mel