MO Parting 71 C30 dually - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 04-15-2018, 07:34 PM

TRUCK IS GONE,,,, THANKS.... Finally getting around to this one. The Pate Swap Meet is next week in Dallas and I would like to have some more operating capital and have this one out of here before we leave. All prices are shipped, and we CANNOT-WILL NOT ship larger parts. First, the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 SOLD shipped for the set. Used, oem HEI distributor, $35.00 shipped. Passenger outer door handle, driver/shop truck quality, $15.00 shipped. What do you need, I am willing to work with you if at all possible. Thanks, Fred.

1auctiondad · 04-15-2018, 07:49 PM

How much for the clutch arm that goes through the firewall?

**Cash3481** · 04-15-2018, 09:23 PM

Fred,
I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid.

**Cash3481** · 04-15-2018, 09:27 PM

Fred,
I guess the pedal and throttle cable as well.

**med.bronze** · 04-15-2018, 09:30 PM

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

**Curtb1971** · 04-15-2018, 09:51 PM

Hey Fred, I'm in for the cab clearance light harness and pads. Also the shifter boot and hardware. Thanks, Curt

**specialtyretail** · 04-16-2018, 08:06 PM

Quote:

Originally Posted by med.bronze

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

Hey Ryan. Let me see if I can get them pulled Tuesday evening. Thanks, Fred.

**specialtyretail** · 04-17-2018, 07:48 PM

Quote:

Originally Posted by med.bronze

Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan

SOLD,,,, THANKS.... Hey Ryan. Got them pulled, will get you some pics in the morning. Manifolds are heavy, be expensive to ship. Thanks, Fred.

**specialtyretail** · 04-17-2018, 07:47 PM

Quote:

Originally Posted by Cash3481

Fred,
I guess the pedal and throttle cable as well.

SOLD,,,, THANKS.... Hey Mike, finally got them pulled. How about $48.00 shipped for all of it. Thanks, Fred.

**specialtyretail** · 04-16-2018, 07:55 PM

Quote:

Originally Posted by Cash3481

Fred,
I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid.

Hey Mike. I just got in from work. Let me get everything pulled and we will go from there. Thanks, Fred.

**Cash3481** · 04-16-2018, 08:06 PM

Quote:

Originally Posted by specialtyretail

Hey Mike. I just got in from work. Let me get everything pulled and we will go from there. Thanks, Fred.

No rush... just get it off when you can and shoot me a total and I’ll get you paid.

**specialtyretail** · 04-16-2018, 07:53 PM

Quote:

Originally Posted by 1auctiondad

How much for the clutch arm that goes through the firewall?

I am wanting to keep the clutch stuff intact as a set. Thanks, Fred.

NJKelly · 04-16-2018, 10:54 AM

My 71 Blazer needs hardware to hold stick shift in place. It's a 4 speed. Not sure what part names are, or if yours would be compatible. If you need more info from me to determine please let me know, thanks.

jaybatta · 04-16-2018, 11:15 AM

2nd in line on cab clearance light harness

Joe

**zicc1835** · 04-18-2018, 08:56 AM

Fred if you take this apart ill take these end of column btween the intermediate thanks
Jess

**specialtyretail** · 04-18-2018, 09:49 AM

Quote:

Originally Posted by zicc1835

Fred if you take this apart ill take these end of column btween the intermediate thanks
Jess

I already have one of those removed and bagged up. $10.00 shipped if you need it. Thanks, Fred.

**cst204x4** · 04-18-2018, 11:13 AM

Sounds good I’ll take blower motor and hardware sending paypal

**specialtyretail** · 04-18-2018, 01:11 PM

Quote:

Originally Posted by cst204x4

Sounds good I’ll take blower motor and hardware sending patpal

I will get it pulled and ready to go. Thanks, Fred.

jessemthompson · 04-19-2018, 10:38 AM

I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

**specialtyretail** · 04-19-2018, 10:42 AM

Quote:

Originally Posted by jessemthompson

I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

I have that, off and ready to go. How about $6.00. That will cover shipping and give me money to buy a soda. Thanks, Fred.

**zicc1835** · 04-18-2018, 12:14 PM

Quote:

Originally Posted by specialtyretail

I already have one of those removed and bagged up. $10.00 shipped if you need it. Thanks, Fred.

i should have known

thanks PP on its way

**specialtyretail** · 04-18-2018, 03:27 PM

Quote:

Originally Posted by zicc1835

i should have known

thanks PP on its way

I should be able to ship them Thursday. Thanks, Fred.

**zicc1835** · 04-18-2018, 09:03 PM

Quote:

Originally Posted by zicc1835

i should have known

thanks PP on its way

sent ....thanks

**Curtb1971** · 04-18-2018, 09:29 PM

Quote:

Originally Posted by specialtyretail

Curt,, the wiring has deteriorated to rust. Let me see if the boot and ring will come of without destroying it. Thanks, Fred.

Thanks man, mine is pretty toast. Rust never sleeps

Quote:

Originally Posted by jaybatta

Hey Fred, if Curt is going to pass on cab clearance light wiring, I might be interested. I'm looking to get an original harness to make a pattern from. Is there enough there to do that?

Thanks

Joe

It's all yours if Fred can help you out

BAWAlex · 04-18-2018, 11:37 AM

I will take the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 shipped for the set. Paypal on the way and sending PM with address. Thanks!!

04-15-2018, 07:34 PM	#1
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,634	Parting 71 C30 dually TRUCK IS GONE,,,, THANKS.... Finally getting around to this one. The Pate Swap Meet is next week in Dallas and I would like to have some more operating capital and have this one out of here before we leave. All prices are shipped, and we CANNOT-WILL NOT ship larger parts. First, the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 SOLD shipped for the set. Used, oem HEI distributor, $35.00 shipped. Passenger outer door handle, driver/shop truck quality, $15.00 shipped. What do you need, I am willing to work with you if at all possible. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 05-20-2018 at 02:56 PM.

04-15-2018, 07:49 PM	#2
1auctiondad Registered User Join Date: Jun 2016 Location: Liberty, Missouri Posts: 107	Re: Parting 71 C30 dually How much for the clutch arm that goes through the firewall?

04-15-2018, 09:23 PM	#3
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 71 C30 dually Fred, I’ll take the kickdown cable/throttle holder/carb mount shipped to 67110. Let me know the total please and I’ll get you paid. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

04-15-2018, 09:27 PM	#4
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting 71 C30 dually Fred, I guess the pedal and throttle cable as well. __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

04-15-2018, 09:30 PM	#5
med.bronze Senior Member Join Date: Dec 2011 Location: Laurel, Mt. Posts: 522	Re: Parting 71 C30 dually Hey Fred, interested in the mirrors and the exhaust manifolds. Shipping is 59044. Thanks- Ryan __________________ 1972 Cheyenne Super 10 SWB,bucket seats,dealer cruise,tilt,tac,a/c,shoulder belts, 350/350 1971 K-10 Custom Deluxe 1971 K-10 Custom

04-15-2018, 09:51 PM	#6
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: Parting 71 C30 dually Hey Fred, I'm in for the cab clearance light harness and pads. Also the shifter boot and hardware. Thanks, Curt __________________ 1971 LSX "Bonnie" build thread http://67-72chevytrucks.com/vboard/s....php?p=8026381 paypal is curtbarton1971@yahoo.com

04-16-2018, 10:54 AM	#13
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 379	Re: Parting 71 C30 dually My 71 Blazer needs hardware to hold stick shift in place. It's a 4 speed. Not sure what part names are, or if yours would be compatible. If you need more info from me to determine please let me know, thanks.

04-16-2018, 11:15 AM	#14
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 841	Re: Parting 71 C30 dually 2nd in line on cab clearance light harness Joe __________________ Joe 1968 K20 1970 K20 Semper Fi

04-18-2018, 08:56 AM	#15
zicc1835 Senior Member Join Date: Mar 2011 Location: Hanover NJ Posts: 4,338	Re: Parting 71 C30 dually Fred if you take this apart ill take these end of column btween the intermediate thanks Jess Attached Images __________________ Grand Theft Auto https://67-72chevytrucks.com/vboard/...d.php?t=855961 Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557

04-18-2018, 11:13 AM	#17
cst204x4 Senior Member Join Date: Jan 2012 Location: corunna michigan Posts: 2,006	Re: Parting 71 C30 dually Sounds good I’ll take blower motor and hardware sending paypal __________________ 1970 CST 4x4 collecting nos parts for this project 1972 cutlass owned since 1984 1972 cutlass conv 1970 Cutlass conv 1981 chevy shortbox 1986 grand national 2004 2500HD Crew Cab 66,000 miles Last edited by cst204x4; 04-18-2018 at 10:00 PM.

04-19-2018, 10:38 AM	#19
jessemthompson Registered User Join Date: Nov 2011 Location: Williamsburg, VA Posts: 960	Re: Parting 71 C30 dually I’m looking for a bolt for the driver side inner fenderwell. It’s the inner bolt with a large washer that bolts to the frame.

04-18-2018, 11:37 AM	#25
BAWAlex Registered User Join Date: Oct 2013 Location: Fritch, TX Posts: 56	Re: Parting 71 C30 dually I will take the set of single groove water pump pulley and single groove crankshaft pulley, matched set of pulleys. $20.00 shipped for the set. Paypal on the way and sending PM with address. Thanks!! __________________ 1966 C10 Long Stepside (1978-3rd Owner) 1971 Custom/10 LWB (2016-3rd Owner) 2011 Camaro LT (2014-2nd Owner) ================================ "I did it, and I can't undo it." Louise

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.