|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-16-2018, 02:45 PM
|
#1 |
|
Registered User
Join Date: May 2018
Location: Atlanta, GA
Posts: 45
|
Who makes a 2 inch drop spindle
I have searched the internet and this board with zero luck... who makes a 2 inch drop spindles for the 1971 c15???
I can find 2.5 inch all day... Thanks ! |
|
|
|
05-16-2018, 06:50 PM
|
#2 |
|
Senior Member
 
Join Date: Oct 2014
Location: New Palestine In
Posts: 932
|
Re: Who makes a 2 inch drop spindle
Well I gotta ask why 2" and not 2 1/2"?
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
|
|
|
05-16-2018, 07:00 PM
|
#3 |
|
Registered User
Join Date: May 2017
Location: Inman/Boiling Springs, SC
Posts: 420
|
Re: Who makes a 2 inch drop spindle
Technically the 2.5 is a 2" drop.
|
|
|
|
|
05-16-2018, 08:41 PM
|
#4 |
|
Special Order
  
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Who makes a 2 inch drop spindle
1/2" really makes that much difference? Only one drop size spindle is offered and then you fine tune with the springs to a desired drop. Springs can be varied easily, either buying what you need or a trip to the spring shop. Make various castings for various steering knuckles is not practical.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
|
|
|
|
05-18-2018, 02:04 PM
|
#5 | |
|
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,234
|
Re: Who makes a 2 inch drop spindle
Quote:
|
|
|
|
|
|
05-16-2018, 08:57 PM
|
#6 |
|
Registered User
Join Date: May 2018
Location: Atlanta, GA
Posts: 45
|
Re: Who makes a 2 inch drop spindle
I bought the truck recently.. was told it has a 3 inch spring drop. I just bought some new rims and the fronts are 20x8.5 with 4.5 backspacing and the tires are 245/45/20..
I want more rake.. and would like a 4 or 5 inch front drop.. reading up on this.. my tire size will work with a 5 inch drop up front.. by my measurements.. a 5.5 drop is gonna be really close and most likely will not work.. So know I am leading toward just buying the 4 inch drop kit.. Posted via Mobile Device |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
