|
|
|
08-16-2018, 07:31 AM
|
#1 |
|
Registered User
Join Date: Dec 2016
Location: South Australia
Posts: 40
|
Rams Horns on TPI pix
If anyone has Rams Horns manifolds (esp chrome) fitted to a 350 TPI in their 60-66 could you please post some pictures?
I would appreciate a look before ordering. Thanks |
|
|
|
08-16-2018, 11:12 AM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Rams Horns on TPI pix
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
08-16-2018, 11:50 PM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Rams Horns on TPI pix
I don't think the issue has anything to do with a TPI but more of the center bolt valve covers? I could be wrong on the valve covers but it seems like I have heard that there is an interference issue with ram horn manifolds.
Edit: Here is some info I found on the subject. https://www.hotrodders.com/forum/ram...rs-181741.html
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
08-17-2018, 06:47 PM
|
#4 |
|
Registered User
Join Date: Dec 2016
Location: South Australia
Posts: 40
|
Re: Rams Horns on TPI pix
Thanks for the feedback.
|
|
|
|
|
08-18-2018, 08:48 AM
|
#5 |
|
Registered User
Join Date: Dec 2013
Location: stony creek va
Posts: 238
|
Re: Rams Horns on TPI pix
hello I don't have pics but on my 57 wagon I used the rams horn with center bolt covers and had no clearance issues..close but no issues....but take in mind my manifolds were uncut...if the mounting surface had been resurfaced a couple times the manifold could touch the VC...gaskets will give a little clearance..Good luck!
|
|
|
|
|
08-18-2018, 09:15 AM
|
#6 |
|
Registered User
Join Date: Feb 2017
Location: Desoto mo
Posts: 106
|
Re: Rams Horns on TPI pix
I had a set on my tbi motor in the 63, not much clearance as mentioned above. I ended up buying a $150 set of headers for an 88-98 that use the stock y-pipe for the same truck. They fit perfect, clear the frame with no grinding, and flow much better. It was a marked improvement. I'll get pics in a few minutes.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
