CA 1972 K10 Suburban - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Brianhill6 · 08-18-2018, 09:16 AM

I do not have time to part this out. Would like to sell it as a whole. This is a good parts suburban. Has minimal rust in rockers. Does not have any interior, or drive train. Has a 14 bolt full floater rear axle. Barn doors are in great shape. Front doors are good as well, expect for the speaker holes cut in them. Have a hood, but no radiator support, or grill. I had started a Cummins 12 valve swap, but just don’t have time to continue the project. Cummins seen in front picture is not included. $2000 and willing to work with auto shipper.

Brianhill6 · 08-27-2018, 07:39 PM

Nobody interested? Soon I will be removing the doors and just take it to the scrap yard. I don’t have time to part it out.

harrisoncole4 · 08-27-2018, 08:03 PM

Would hate to see this go to the scrapper. Too bad i live on the other side of the country

**dozerbill72** · 08-27-2018, 08:22 PM

Does it have a title?

Brianhill6 · 08-27-2018, 10:16 PM

It does not. It came out of Montana. California is just to hard to get a title on a vehicle. I could provide a bill of sale

**1968k20** · 08-28-2018, 06:46 AM

What engine is in it?

Brianhill6 · 08-28-2018, 08:48 AM

Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

**1968k20** · 08-28-2018, 10:28 AM

Quote:

Originally Posted by Brianhill6

Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

What year is the engine? How much for the engine?

**1968k20** · 08-28-2018, 10:29 AM

Also price for barn doors

Brianhill6 · 08-28-2018, 11:09 AM

Not exactly sure what year the engine is. It is a p pump engine. I would let the engine go for $3000 with the adapter. Adapter alone was $1000. I’ll have to think about the barn doors

JMC3178 · 08-28-2018, 11:21 AM

I don't have a need for the whole vehicle, but if you are going to scrap it let me know and I can take a couple parts off your hands.

Brianhill6 · 08-28-2018, 10:53 PM

What do you need?

ManNamedJed · 08-30-2018, 11:15 AM

I'd be interested in the side trim if you do decide to part out.

**1968k20** · 08-30-2018, 02:09 PM

Would you take $1500 for whole thing and I'll pick

Brianhill6 · 08-30-2018, 04:20 PM

Without the engine and trans yes I would

bets licea · 09-12-2018, 12:52 AM

Interested in both passenger side doors, hinges and "B" pillar.

08-18-2018, 09:16 AM	#1
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	1972 K10 Suburban I do not have time to part this out. Would like to sell it as a whole. This is a good parts suburban. Has minimal rust in rockers. Does not have any interior, or drive train. Has a 14 bolt full floater rear axle. Barn doors are in great shape. Front doors are good as well, expect for the speaker holes cut in them. Have a hood, but no radiator support, or grill. I had started a Cummins 12 valve swap, but just don’t have time to continue the project. Cummins seen in front picture is not included. $2000 and willing to work with auto shipper. Attached Images

08-27-2018, 07:39 PM	#2
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Nobody interested? Soon I will be removing the doors and just take it to the scrap yard. I don’t have time to part it out.

08-27-2018, 08:03 PM	#3
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: 1972 K10 Suburban Would hate to see this go to the scrapper. Too bad i live on the other side of the country __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

08-27-2018, 08:22 PM	#4
dozerbill72 Senior Member Join Date: Oct 2015 Location: Berryville Arkansas Posts: 402	Re: 1972 K10 Suburban Does it have a title?

08-27-2018, 10:16 PM	#5
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban It does not. It came out of Montana. California is just to hard to get a title on a vehicle. I could provide a bill of sale

08-28-2018, 06:46 AM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban What engine is in it? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-28-2018, 08:48 AM	#7
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Right now there is a Cummins 12 valve mated to a 6 speed Allison with an advanced adapter. I also have a special adapter that allows a 205 transfer case to be mated to the Allison. Those are not included in the price, but are for sale.

08-28-2018, 10:29 AM	#9
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban Also price for barn doors __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-28-2018, 11:09 AM	#10
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Not exactly sure what year the engine is. It is a p pump engine. I would let the engine go for $3000 with the adapter. Adapter alone was $1000. I’ll have to think about the barn doors

08-28-2018, 11:21 AM	#11
JMC3178 Registered User Join Date: Aug 2016 Location: Fresno, CA Posts: 6	Re: 1972 K10 Suburban I don't have a need for the whole vehicle, but if you are going to scrap it let me know and I can take a couple parts off your hands.

08-28-2018, 10:53 PM	#12
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban What do you need?

08-30-2018, 11:15 AM	#13
ManNamedJed Registered User Join Date: May 2018 Location: Reno, NV Posts: 232	Re: 1972 K10 Suburban I'd be interested in the side trim if you do decide to part out.

08-30-2018, 02:09 PM	#14
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: 1972 K10 Suburban Would you take $1500 for whole thing and I'll pick __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-30-2018, 04:20 PM	#15
Brianhill6 Registered User Join Date: May 2009 Location: Escalon, ca Posts: 644	Re: 1972 K10 Suburban Without the engine and trans yes I would

09-12-2018, 12:52 AM	#16
bets licea Registered User Join Date: Jan 2008 Location: chino,california Posts: 16	Re: 1972 K10 Suburban Interested in both passenger side doors, hinges and "B" pillar.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.