AR wtb shifting rods from a 67-72 3 speed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**65truckowner** · 08-22-2018, 07:38 AM

I am needing a set of shifting rods from a 67-72 c10 with the 3 speed on the column price shipped to 72560 Thanks

shoveldug · 08-22-2018, 08:11 AM

i will ship you a set for $50 total. They are from a 6 cyl truck saginaw transmission.

**southern parts** · 08-22-2018, 08:26 AM

6 cyl. or V8 ?

**65truckowner** · 08-22-2018, 08:58 AM

Quote:

Originally Posted by southern parts

6 cyl. or V8 ?

I have a 65 c10 with a 68 3speed in it with a 350 the rods I have won't fit someone said the 67-72 six engine trucks would work
Posted via Mobile Device

**southern parts** · 08-22-2018, 09:40 AM

The rods that shoveldug has should work for you.

**65truckowner** · 08-22-2018, 05:02 PM

Do you have paypal
Posted via Mobile Device

shoveldug · 08-23-2018, 06:18 AM

Quote:

Originally Posted by 65truckowner

Do you have paypal
Posted via Mobile Device

Yes I do. It is dwl65101@yahoo.com I also sent you a PM

**special-K** · 08-22-2018, 10:57 PM

If nothing works out I have a bunch of the rods. But they are all mixed up and I'd need help sorting out what is what

**65truckowner** · 08-23-2018, 07:31 AM

Ok money sent Thanks

**65truckowner** · 09-01-2018, 07:44 PM

Just a heads up the shifting rods from a 67-69 chevy truck will not fit a 65 with a 68 3 speed transmission

**special-K** · 09-01-2018, 08:33 PM

Those were 67-72 6cyl rods for 3spd, correct? And you are saying those will not work on a '65 with V8 and 3spd. So have you tried 60-66 V8 rods for 3spd? Is the engine mounted in the 6cyl position (dist. back into the firewall) or the V8 position?

**65truckowner** · 09-01-2018, 09:10 PM

They will not work on my truck. I have a 350 with a 68 3 speed. The truck is a 65. The rods are too short and will not clear the firewall and the clutch z bar. I was under the truck a while trying everything to make them work. I have not tried the 60-66 v8 rods. I think the engine is in the 6 position but not sure. The original bell housing was in the truck when I got it bolted to the factory cross member right behind the engine.

**southern parts** · 09-02-2018, 10:45 AM

Are the engine frame stands in the front or rear holes? How much room between the distributor and firewall?

**65truckowner** · 09-02-2018, 09:08 PM

The back holes but like I said the bell housing is bolted to the front cross member. It cannot move forward to my knowledge Any way I went today to buy a tranmission and driveshaft from a guy and ended up buying the whole truck so I will have everything I need to put the right 3 speed in it

08-22-2018, 07:38 AM	#1
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	wtb shifting rods from a 67-72 3 speed I am needing a set of shifting rods from a 67-72 c10 with the 3 speed on the column price shipped to 72560 Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

08-22-2018, 08:11 AM	#2
shoveldug Registered User Join Date: Mar 2014 Location: Volant, Pennsylvania Posts: 351	Re: wtb shifting rods from a 67-72 3 speed i will ship you a set for $50 total. They are from a 6 cyl truck saginaw transmission. Last edited by shoveldug; 08-22-2018 at 08:35 AM.

08-22-2018, 08:26 AM	#3
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,475	Re: wtb shifting rods from a 67-72 3 speed 6 cyl. or V8 ?

08-22-2018, 09:40 AM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,475	Re: wtb shifting rods from a 67-72 3 speed The rods that shoveldug has should work for you.

08-22-2018, 05:02 PM	#6
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	Re: wtb shifting rods from a 67-72 3 speed Do you have paypal Posted via Mobile Device

08-22-2018, 10:57 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: wtb shifting rods from a 67-72 3 speed If nothing works out I have a bunch of the rods. But they are all mixed up and I'd need help sorting out what is what __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-23-2018, 07:31 AM	#9
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	Re: wtb shifting rods from a 67-72 3 speed Ok money sent Thanks __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-01-2018, 07:44 PM	#10
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	Re: wtb shifting rods from a 67-72 3 speed Just a heads up the shifting rods from a 67-69 chevy truck will not fit a 65 with a 68 3 speed transmission __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-01-2018, 08:33 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: wtb shifting rods from a 67-72 3 speed Those were 67-72 6cyl rods for 3spd, correct? And you are saying those will not work on a '65 with V8 and 3spd. So have you tried 60-66 V8 rods for 3spd? Is the engine mounted in the 6cyl position (dist. back into the firewall) or the V8 position? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-01-2018, 09:10 PM	#12
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	Re: wtb shifting rods from a 67-72 3 speed They will not work on my truck. I have a 350 with a 68 3 speed. The truck is a 65. The rods are too short and will not clear the firewall and the clutch z bar. I was under the truck a while trying everything to make them work. I have not tried the 60-66 v8 rods. I think the engine is in the 6 position but not sure. The original bell housing was in the truck when I got it bolted to the factory cross member right behind the engine. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

09-02-2018, 10:45 AM	#13
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,475	Re: wtb shifting rods from a 67-72 3 speed Are the engine frame stands in the front or rear holes? How much room between the distributor and firewall?

09-02-2018, 09:08 PM	#14
65truckowner Senior Member Join Date: Oct 2012 Location: mountain view arkansas Posts: 1,320	Re: wtb shifting rods from a 67-72 3 speed The back holes but like I said the bell housing is bolted to the front cross member. It cannot move forward to my knowledge Any way I went today to buy a tranmission and driveshaft from a guy and ended up buying the whole truck so I will have everything I need to put the right 3 speed in it __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=548705

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.