Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-30-2018, 07:43 PM | #1 |
Registered User
Join Date: Mar 2014
Location: Corvallis, OR
Posts: 715
|
Recommend some exhaust mufflers
I put my 4.8L last year and I can't say that I care for the exhaust I have on it. It's too loud in light throttle applications, too loud when it starts, and sounds like a firecracker when it goes from 2500-3000 rpm. They are thrush welded mufflers.
I have dual 2.5" pipes with no H pipe or crossover. I wanted to add an H pipe, but space is tight where it should go. I'm looking for something quieter for normal driving. I don't care if it's still pretty quiet at rpm, but also don't care if it's loud. I would like to stay under $100 for each muffler. Any recommendations?
__________________
1972 GMC Jimmy Custom 4.8L (L20)/6L90E/NP205 1989 Chevy Suburban V2500 350/Turbo 400/4.11 gears 1996 Chevy Suburban K1500 350/4L60E |
08-30-2018, 08:48 PM | #2 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Recommend some exhaust mufflers
I have the same as you, with Sanderson CSLS1 shortie headers and good old glass packs. Smooth at idle and moderate acceleration but if you step on it, it’s just enough to irritate the neighbors.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
08-31-2018, 09:33 AM | #3 |
Registered User
Join Date: Jul 2016
Location: Brandon,MS
Posts: 489
|
Re: Recommend some exhaust mufflers
|
08-30-2018, 08:50 PM | #4 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,670
|
Re: Recommend some exhaust mufflers
I have a set of walker super quite mufflers I'm gonna try..I don't know if I'm gonna like em or not..my other truck has headers and a set of magflow...not magnaflow....I think they're a knockoff...love the sound...not overly loud but has a nice rumble..
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
08-31-2018, 12:08 AM | #5 |
Registered User
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
|
Re: Recommend some exhaust mufflers
I needed something tame enough for the HOA with but with enough rumble to turn heads. The large Dynomax Super Turbos are what I went with
__________________
1970 C-10 "Old Yeller" |
08-31-2018, 06:38 AM | #6 |
Registered User
Join Date: Feb 2011
Location: Parkville, MD
Posts: 1,024
|
Re: Recommend some exhaust mufflers
I've run the turbo style mufflers on a handful of vehicles. I really like them. Quiet enough for a DD. More of an open exhaust type of sound - throatier, deeper. A good bit louder when you get on it. I find it to be a good balance.
__________________
1970 C20 Custom Camper - 350, TH350 1997 GMC Suburban 1994 Acura Integra GSR 1987 Dodge Daytona Shelby Z |
08-31-2018, 03:52 PM | #7 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Recommend some exhaust mufflers
None.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
08-31-2018, 04:28 PM | #8 |
Registered User
Join Date: Jul 2016
Location: Brandon,MS
Posts: 489
|
Re: Recommend some exhaust mufflers
You put an X or H pipe in or just run straight out on each side?
|
09-02-2018, 06:19 AM | #9 |
Senior Member
Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Recommend some exhaust mufflers
I just got done with a complete front to back system. 2.5 pipes, dual cats, H pipe crossover, Flowmaster 2 chamber Super 44 mufflers, side exit tail pipes behind rear wheels.
I picked the Flowmaster after hearing a bunch of YouTube clips comparing Magnaflow vs. Flowmaster. I was looking for a deep mellow tone that was more growl than snapping and popping. (think Fox body Mustang 5.0 sound) Really like the sound of my system. sounds really good but not loud. Even as the engine revs up, it has sound but never too loud. just when you expect it to start sounding rowdy, it almost gets quieter. I have not noticed a drone yet, but have done very little highway cruising in my first 200 miles. The entire system was expensive but worth it. wish I could post a video of it here but cannot get to upload my 30 sec clip.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
09-02-2018, 06:17 PM | #10 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Recommend some exhaust mufflers
Straight out the back with 18” x 4” SS echo chambers. Nice and grumbly!
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
09-02-2018, 11:52 AM | #11 |
Registered User
Join Date: Aug 2006
Location: Redmond, WA
Posts: 6,332
|
Re: Recommend some exhaust mufflers
I have very large DynoMax on my cars and truck. I like them in both applications.
They are quiet and do NOT have any drone at part throttle. But they are loud and aggressive under full load, which I like. But quiet (while sounding serious) the rest of the time. Here's a video. The phone doesn't pick up any of the deep bass sound, but it serves to show that you can really only hear it at the rear and not up front. https://www.youtube.com/watch?v=a8I5Zf6uIOo
__________________
1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible |
09-03-2018, 01:23 PM | #12 |
Registered User
Join Date: Apr 2014
Location: Union City, CA
Posts: 384
|
Re: Recommend some exhaust mufflers
I have tried recently two different mufflers.
The Dynomax Super Turbo Muffler and the Flowmaster 40 series Delta Flow muffler. I run an LS3 with mid-length headers (DT 1 3/4") through 2.5" tubing with an H-pipe, dumped near the axle. The Dynomax Super Turbo Muffler is fairly quite, sounds pretty decent. The Flowmaster 40 series Delta Flow is surprisingly not as loud as I thought it would be, and sounds quite good. For now I am going stick with the Flowmaster, it just sounds better to me, and better than the video can reproduce. You can listen to both of them here and judge for yourself. Dynomax Super Turbo Muffler https://photos.smugmug.com/C10/i-zmt...65054-1920.mp4 Flowmaster 40 series Delta Flow muffler https://photos.smugmug.com/C10/i-hb4...45400-1920.mp4 |
09-03-2018, 02:32 PM | #13 | |
Registered User
Join Date: Jan 2016
Location: Poway, CA
Posts: 356
|
Re: Recommend some exhaust mufflers
Quote:
__________________
1970 C-10 "Old Yeller" |
|
09-03-2018, 02:53 PM | #14 |
Registered User
Join Date: Apr 2014
Location: Union City, CA
Posts: 384
|
Re: Recommend some exhaust mufflers
Mine are the 14" long casing and overall 18" length, part number 17734. It's the more typical turbo muffler size and same size as the Flowmasters. The 20" case or 25.5" overall seemed kind of long where I wanted them, they might have fit though. Either of the mufflers will be quieter as well if they exited all the way to the rear.
|
09-03-2018, 08:49 PM | #15 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,670
|
Re: Recommend some exhaust mufflers
Dlw ...those fms sound great....what cam you running?....
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
09-03-2018, 10:04 PM | #16 |
Registered User
Join Date: Apr 2014
Location: Union City, CA
Posts: 384
|
Re: Recommend some exhaust mufflers
Thanks.
I am running a Cam Motion Titan 2 LS3 Camshaft (222/230-113+3). |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|