What’s wrong with this picture?

[ScottyTightdog]

This just doesn’t look right to me. Is it the wrong bushing or is the whole leaf spring mount to wide?

[stangtjk]

Something wrong with the bushing, spring should be centered. There is a good bit of space between the leafs and the front mounts.

[Chevyrestorerman]

what has been done to the vehicle ? take a pic of both sides in the same pic

[Blazerowner]

Wrong bushings. You could buy the right set and swap them. I wouldn’t run it like that the spring can move and if both sides are that way, all the suspension can move.

[ScottyTightdog]

Originally Posted by Blazerowner

Wrong bushings. You could buy the right set and swap them. I wouldn’t run it like that the spring can move and if both sides are that way, all the suspension can move.

Where did you get those?

[hemi43]

How wide is that spring? Should be 2 1/2 "

[68panelman]

Looks like they are the bushing for the rear of the spring, not the front. Whatever the case it is definitely wrong and is a dangerous situation

[A1971Blazer]

you can get bushings here
https://www.energysuspensionparts.com/3.2105

[warrpath4x4]

ya looks like a 2.5" spring in a 3" pocket. here is another option to fix it.

https://diy4x.com/product.php?produc...cat=250&page=2

[ScottyTightdog]

Originally Posted by warrpath4x4

ya looks like a 2.5" spring in a 3" pocket. here is another option to fix it.

https://diy4x.com/product.php?produc...cat=250&page=2

Yes that’s what I used with there 2 1/2” bushing as well. The hanger is 3 1/2” wide and the bushing that was in there was 3” wide and yes the spring is 2 1/2”. So there was a 1/2” slop in bushing and another 1/2” slop in the hanger. But it’s all fixed now. Thx guys