To all Canadian built truck owners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Canuckvetter** · 10-02-2018, 09:17 PM

Do any of you Canadian truck owner have a copy of an Oshawa build sheet?
Just curious. I have never seen one from the 67-72 trucks. Post them if you got them. Just the build sheets not the glove box SPID.

chewychevy67 · 10-02-2018, 09:21 PM

I too have never seen any in the trucks I've had or parted. Curious to see what's out there.

CSTGURU · 10-02-2018, 11:10 PM

Nope, i too have never seen one. Built lots of trucks, parted lots of trucks, found them in almost every canadian car i've had, but never in a truck.

**dagnabbitt** · 10-03-2018, 08:25 AM

Never seen one.

**StingRay** · 10-03-2018, 09:07 AM

Never and I've been through tons of trucks of my own and at the wreckers.

Coley · 10-03-2018, 10:58 AM

I've never seen one...but then again, I've never looked for one except for in my own truck, which was a Fremont/Calif. truck.

C.

Willys47 · 10-03-2018, 08:57 PM

I have never seen one out here out here on the westcoast.

Keith Seymore · 10-04-2018, 09:06 AM

I don't have a truck specific build sheet, but I do have a number of passenger car build sheets from Oshawa.

These do not look like the normal 8.5x11 printout, which might be why they were not preserved (maybe folks didn't realize what they were and they got pitched).

K

Keith Seymore · 10-04-2018, 09:16 AM

I'm 1000% sure they were used therefore will turn up.

They were intended to be thrown away at the end of the line just like extra fasteners, coffee cups and other misc papers. The fact is that it was just easier to leave them in place and build the vehicle up around them, which is why you find them in the seat springs, under the carpet (with tar sprayed over half of them, or a screw shot through the middle) or stuffed in obscure corners of body panels. I've thrown away several thousand of them myself.

In addition to defining the option content that needed to be added they also helped keep the build in sequence. As a result, any area where components were built up remotely and then conveyed to the main line in sequence are fair game for build sheets and build sequence number notations: front and rear axle, engines, transmissions, seats, front end sheetmetal, above the headliner, under the carpet, inside the door trim panels, etc.

Even with all our "technological advancements" we still build cars and trucks with a piece of paper hanging on them.

K

10-02-2018, 09:17 PM	#1
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	To all Canadian built truck owners Do any of you Canadian truck owner have a copy of an Oshawa build sheet? Just curious. I have never seen one from the 67-72 trucks. Post them if you got them. Just the build sheets not the glove box SPID. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

10-02-2018, 09:21 PM	#2
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,537	Re: To all Canadian built truck owners I too have never seen any in the trucks I've had or parted. Curious to see what's out there.

10-02-2018, 11:10 PM	#3
CSTGURU Registered User Join Date: May 2015 Location: MANITOBA Posts: 48	Re: To all Canadian built truck owners Nope, i too have never seen one. Built lots of trucks, parted lots of trucks, found them in almost every canadian car i've had, but never in a truck.

10-03-2018, 08:25 AM	#4
dagnabbitt Senior Member Join Date: Dec 2014 Location: Edmonton Alberta Posts: 1,402	Re: To all Canadian built truck owners Never seen one. __________________ DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10

10-03-2018, 09:07 AM	#5
StingRay Senior Member Join Date: Mar 2000 Location: Saskatoon,SK,Canada Posts: 2,476	Re: To all Canadian built truck owners Never and I've been through tons of trucks of my own and at the wreckers. __________________ Saskatoon, Saskatchewan Canada

10-03-2018, 10:58 AM	#6
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: To all Canadian built truck owners I've never seen one...but then again, I've never looked for one except for in my own truck, which was a Fremont/Calif. truck. C. __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

10-03-2018, 08:57 PM	#7
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: To all Canadian built truck owners I have never seen one out here out here on the westcoast. __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

10-04-2018, 09:06 AM	#8
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,213	Re: To all Canadian built truck owners I don't have a truck specific build sheet, but I do have a number of passenger car build sheets from Oshawa. These do not look like the normal 8.5x11 printout, which might be why they were not preserved (maybe folks didn't realize what they were and they got pitched). K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ Last edited by Keith Seymore; 10-04-2018 at 09:21 AM.

10-04-2018, 09:16 AM	#9
Keith Seymore Registered User Join Date: May 2009 Location: Motor City Posts: 9,213	Re: To all Canadian built truck owners I'm 1000% sure they were used therefore will turn up. They were intended to be thrown away at the end of the line just like extra fasteners, coffee cups and other misc papers. The fact is that it was just easier to leave them in place and build the vehicle up around them, which is why you find them in the seat springs, under the carpet (with tar sprayed over half of them, or a screw shot through the middle) or stuffed in obscure corners of body panels. I've thrown away several thousand of them myself. In addition to defining the option content that needed to be added they also helped keep the build in sequence. As a result, any area where components were built up remotely and then conveyed to the main line in sequence are fair game for build sheets and build sequence number notations: front and rear axle, engines, transmissions, seats, front end sheetmetal, above the headliner, under the carpet, inside the door trim panels, etc. Even with all our "technological advancements" we still build cars and trucks with a piece of paper hanging on them. K Attached Images __________________ Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.