CA cab...less roof!

[morepwr]

Here is the story. My 67 needed a roof and A pillars and I got this cab just for that as the roof was in great condition. After I cut that off I was left with a cab I have no need for but still has some usable sheet metal for somebody. The floor is pretty solid. There is a bunch of rust in the kickpanel areas on both sides. I thought the cab corners in the rear are bondo covering rust. The rockers appear ok but I would think they are not great and the floor braces are rusty. I don't know what year it is as there is no tag/no title


Price: $75? Only need part of it? Ask! I have a sawzall and cut off wheels and will work with you any way I can. I am in Ventura Ca so obviously you would need to come here as shipping would be more than the whole thing is worth.

[morepwr]

Bump. I don't want to scrap it.

[smmf]

Would you be willing to cut this section out? and ship to Niagara Falls NY 14303?

[morepwr]

Originally Posted by smmf

Would you be willing to cut this section out? and ship to Niagara Falls NY 14303?

absolutely! PM sent.

[jjzepplin]

Originally Posted by smmf

Would you be willing to cut this section out? and ship to Niagara Falls NY 14303?

I could use the opposite side of this cut a little wider and lower. 33511

[Austinjay]

Here is what i need in red. Circled in green i would like but can live without.

[rechinca]

Looking to bet the action on LH firewall from lower seam up to top edge of cowl. Shipped to 95687. See the attached pic of the section I’m needing to replace.

[blap]

Hello,I have a 72 camper I need a piece of the rear panel from the window opening to the floor .I will post a pic of the area I need .

[morepwr]

Originally Posted by blap

Hello,I have a 72 camper I need a piece of the rear panel from the window opening to the floor .I will post a pic of the area I need .

Sounds good. Let me know and I can cut what you need.

[blap]

Pics of the piece I'll be needing

[blap]

Piece needed

[Austinjay]

Could i get prices and shipping for these 2 pieces?

Thank you!

[morepwr]

I will check those pieces to make sure they are good and PM you.

[morepwr]

More pics of the floor areas to hopefully help answer some questions. The floor braces that go over toward the rockers both front and back have rot. In the rear the floor above the rear braces is starting to pucker up and has ate thru a hole I tried to show in the picture

[blap]

So I sent another outline of the panel If you cut the black line I should be all set.

[blap]

Also need this area

[blap]

Thank you for your help I appreciate your time and effort.Excellent service

[my kids toy]

Do you still have the hump, pictured what blap posted ? I would take it if still available.

[morepwr]

Originally Posted by my kids toy

Do you still have the hump, pictured what blap posted ? I would take it if still available.

I don't. There is very little left actually!

I was very happy to cut out pieces for others to help their projects along. Thank you!

[Graham57a]

Are there any floor board pieces left? I need the floor board section underneath the gas pedal

[morepwr]

Originally Posted by Graham57a

Are there any floor board pieces left? I need the floor board section underneath the gas pedal

Its all gone.

[Graham57a]

Originally Posted by morepwr

Its all gone.

Ten four, thanks for the quick response